GaAs SPST High Isolation Terminated Switch
GaAs SPST High Isolation Terminated Switch 0.5 - 2.0 GHz
Features
• • • • • Terminated RF Output High Isolation: 42 dB u...
Description
GaAs SPST High Isolation Terminated Switch 0.5 - 2.0 GHz
Features
Terminated RF Output High Isolation: 42 dB up to 2.0 GHz Single Positive Control CMOS Compatible Logic SOIC-8 Plastic Package
SW-393 V4
Functional Schematic
Description
M/A-COM’s SW-393 is a GaAs monolithic SPST terminated switch in a low cost SOIC 8-lead plastic package. The SW-393 is ideally suited for use where low power consumption and high isolation are required. Typical applications include PCS and GSM LO Switching, switch matrices and switched filter banks in systems such as radio and cellular equipment. The SW-393 is fabricated using a mature 1-micron gate length GaAs MESFET process. The process features full chip passivation for increased performance and reliability.
Pin Configuration 4
Pin No.
1 2 3 4
Ordering Information 1
Part Number
SW-393-PIN SW-393TR SW-393SMB
Function
GND RF1 GND GND
Pin No.
5 6 7 8
Function
GND CTL RF2 GND
Package
Bulk Packaging 1000 piece reel Sample Board
4. Blocking capacitors are required on all RF ports. VS can be applied at RF1 or RF2 using 10K or greater pull-up resistors.
1. Reference Application Note M513 for reel size information.
Absolute Maximum Ratings 2,3
Parameter
Input Power Operating Voltage (VS, VCTL) Operating Temperature Storage Temperature
Truth Table 5,6,7
Control
0 1 5. 6. 7. “0” = 0 ± 0.2 VDC “1” = +5 ± 0.2 VDC Vs = +5 ± 0.2 VDC
Absolute Maximum
+34 dBm +8.5 Volts -40°C to +85°C -65°C to +150°C
RF1 - RF2
Off On
2. Exceeding any o...
Similar Datasheet