Thick film rectangular
MCR006 (0201 size : 1 / 20W)
1) Extremely small light
Area ratio is 60% smaller than that of chip 1005, while weight ratio has been cut 80%.
2) Highly reliable chip resistor
Ruthenium oxide dielectric offers superior resistance to the elements.
3) Electrodes not corroded by soldering
Thick film makes the electrodes very strong.
4) Flat surface further facilitates mounting
5) ROHM resistors have approved ISO–9001 certification.
Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the
product before using or ordering it.
Power must be derated according to the power derating curve in
Figure 1 when ambient temperature exceeds 70°C.
0.05W (1 / 20W)
0 70 100 125
AMBIENT TEMPERATURE (°C)
The voltage rating is calculated by the following equation.
If the value obtained exceeds the limiting element voltage,
the voltage rating is equal to the maximum operating voltage.
E: Rated voltage (V)
P: Rated power (W)
R: Nominal resistance (Ω)
See Table 1.
Limiting element voltage 25V
−55°C to +125°C