Document
APTDF100H60
Fast Diode Rectifier Bridge Power Module
+
AC1 AC2
VRRM = 600V IC = 100A @ Tc = 80°C
Application • • • • Uninterruptible Power Supply (UPS) Induction heating Welding equipment High speed rectifiers
Features • • • • • • • •
www.DataSheet4U.com
-
Ultra fast recovery times Soft recovery characteristics Very low stray inductance High blocking voltage High current Low leakage current Very low stray inductance - Symmetrical design - Lead frames for power connections High level of integration
AC2
Benefits • Outstanding performance at high frequency operation Low losses Low noise switching Solderable terminals for easy PCB mounting Direct mounting to heatsink (isolated package) Low junction to case thermal resistance
+
-
AC1
• • • • •
Absolute maximum ratings
Symbol VR VRRM IF(A V) IF(RMS) IFSM
Parameter Maximum DC reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Average Forward Current Duty cycle = 50% TC = 25°C TC = 80°C TC = 45°C TC = 45°C
Max ratings 600 135 100 135 500
Unit V
RMS Forward Current Duty cycle = 50% Non-Repetitive Forward Surge Current 8.3ms
A
APTDF100H60 – Rev 0 May, 2005
These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed.
APT website – http://www.advancedpower.com
1-4
APTDF100H60
All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics
Symbol Characteristic VF IRM CT Diode Forward Voltage Maximum Reverse Leakage Current Junction Capacitance Test Conditions IF = 100A IF = 200A IF = 100A Tj = 125°C Tj = 25°C VR = 600V Tj = 125°C VR = 600V Min Typ 1.6 2.0 1.3 Max 2.0 Unit V 250 500 190 µA pF
Dynamic Characteristics
Symbol Characteristic trr trr Qrr IRRM trr Qrr IRRM Reverse Recovery Time Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current
Test Conditions IF=1A,VR=30V di/dt = 100A/µs Tj = 25°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C IF = 100A VR = 400V di/dt=1000A/µs Tj = 125°C
Min
Typ 34 160 220 290 1530 5 13 100 2890 44
Max
Unit ns ns nC A ns
nC A
IF = 100A VR = 400V di/dt = 200A/µs
Thermal and package characteristics
Symbol RthJC VISOL TJ TSTG TC Torque Wt Characteristic Junction to Case
RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz
Min 2500 -40 -40 -40 1.5
Typ
Max 0.55 175 125 100 4.7 160
Unit °C/W V °C N.m g
Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight
To Heatsink
M5
APT website – http://www.advancedpower.com
2-4
APTDF100H60 – Rev 0 May, 2005
APTDF100H60
Typical Performance Curve
Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 0.6 Thermal Impedance (°C/W) 0.5 0.4 0.3 0.2 0.1 0 0.00001 0.9 0.7 0.5 0.3 0.1 0.05 0.0001 0.001 Single Pulse
0.01
0.1
1
10
Rectangular Pulse Duration (Seconds) Forward Current vs Forward Voltage 300 IF, Forward Current (A) 250
T J=175°C
300
trr, Reverse Recovery Time (ns)
Trr vs. Current Rate of Charge
T J=125°C VR=400V
250
100 A
200 A
200 150 100
TJ =125°C TJ =25°C
200 150 100 50 0 200 400 600 800 -diF/dt (A/µs) 1000 1200
50 A
50 0 0.0 0.5 1.0 1.5 2.0
TJ=-55°C
2.5
3.0
VF, Anode to Cathode Voltage (V)
QRR, Reverse Recovery Charge (µC)
3 2 1 0 0
T J=125°C VR=400V
200 A
IRRM, Reverse Recovery Current (A)
4
QRR vs. Current Rate Charge
60 50 40 30 20 10 0 0
IRRM vs. Current Rate of Charge
T J=125°C V R=400V 200 A 100 A 50 A
100 A 50 A
200
400
600
800
1000 1200
200
400
600
800
1000 1200
-diF/dt (A/µs) Capacitance vs. Reverse Voltage 1400
C, Capacitance (pF)
-diF/dt (A/µs) Max. Average Forward Current vs. Case Temp. 150 125
IF(AV) (A)
Duty Cycle = 0.5 TJ =175°C
1200 1000 800 600 400 200 0 1 10 100 1000 VR, Reverse Voltage (V)
100
50 25 0 25 50 75 100 125 150 175 Case Temperature (°C)
APT website – http://www.advancedpower.com
3-4
APTDF100H60 – Rev 0 May, 2005
75
APTDF100H60
Package outline (dimensions in mm)
APT reserves the right to change, without notice, the specifications and information contained herein
APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved.
APT website – http://www.advancedpower.com
4-4
APTDF100H60 – Rev 0 May, 2005
.