TDM CODEC
CS42436
108 dB, 192 kHz 6-In, 6-Out TDM CODEC
FEATURES
GENERAL DESCRIPTION
Six 24-bit A/D, Six 24-bit D/A Converte...
Description
CS42436
108 dB, 192 kHz 6-In, 6-Out TDM CODEC
FEATURES
GENERAL DESCRIPTION
Six 24-bit A/D, Six 24-bit D/A Converters ADC Dynamic Range
– 105 dB Differential – 102 dB Single-Ended
DAC Dynamic Range – 108 dB Differential – 105 dB Single-Ended
ADC/DAC THD+N – -98 dB Differential – -95 dB Single-Ended
Compatible with Industry-Standard Time Division Multiplexed (TDM) Serial Interface
DAC Sampling Rates up to 192 kHz ADC Sampling Rates up to 96 kHz Programmable ADC High-Pass Filter for DC
Offset Calibration Logarithmic Digital Volume Control
Hardware Mode or Software I²C™ & SPI™
Supports Logic Levels Between 5 V and 1.8 V
The CS42436 CODEC provides six multi-bit analog-to-digital and six multi-bit digital-to-analog delta-sigma converters. The CODEC is capable of operation with either differential or single-ended inputs and outputs, in a 52-pin MQFP package.
Six fully differential, or single-ended, inputs are available on stereo ADC1, ADC2, and ADC3. When operating in Single-ended Mode, an internal MUX before ADC3 allows selection from up to four single-ended inputs. Digital volume control is provided for each ADC channel, with selectable overflow detection.
All six DAC channels provide digital volume control and can operate with differential or single-ended outputs.
An auxiliary serial input is available for an additional two channels of PCM data.
The CS42436 is available in a 52-pin MQFP package in Commercial (-10°C to +70°C) and Automotive (-40°C to +10...
Similar Datasheet