Power driver IC
BD7960FM
Optical disc ICs
Power driver IC for CD changer
BD7960FM
BD7960FM is a 6-channel driver (4-channel BTL driver ...
Description
BD7960FM
Optical disc ICs
Power driver IC for CD changer
BD7960FM
BD7960FM is a 6-channel driver (4-channel BTL driver + 2-channel loading driver) for car CD changer. This IC integrates 1-channel operational amplifier for various purposes. The size reduction of the set is achieved by integrating loading driver and actuator driver into a single chip.
!Applications CD changer
www.DataSheet4U.com
!Features 1) This circuit is a 6-channel driver IC consisting of four BTL drivers and two loading drivers. 2) Two wide dynamic range loading drivers of MOS output (RON=1.0Ω). 3) The circuit is provided with loading driver voltage setting terminals. 4) A general Opamp and Pre Opamp are built in. 5) The circuit has a mute switch. 6) The circuit has a reset terminal. 7) A thermal shutdown circuit is built in. 8) Since HSOP-M36 power package is used, the set requires a reduced space.
!Absolute maximum ratings (Ta=25°C)
Parameter Supply voltage Power dissipation Operating temperature range Storage temperature range Symbol VCC Pd Topr Tstg Limits 15 2.2∗ −40~+85 −55~+150 Unit V W °C °C
∗ Reduced by 17.6mW for each increase in Ta of 1°C over 25°C, on less than 3% (percentage occupied by copper foil), 70mm×70mm, t=1.6mm, glass epoxy mounting.
!Recommended operating conditions (Ta=25°C)
Parameter Supply voltage 1 Supply voltage 2 Symbol VCC1 VCC2 Min. 4.5 4.5 Typ. 8.0 8.0 Max. 14.0 VCC1 Unit V V
1/10
BD7960FM
Optical disc ICs
!Block diagram
36
35
CH6
34
33
32
31
30
29
28
27
2...
Similar Datasheet