Quad Transceiver
DS25BR400 Quad Transceiver with Input Equalization and Output De-Emphasis
May 2006
DS25BR400 Quad Transceiver with Inp...
Description
DS25BR400 Quad Transceiver with Input Equalization and Output De-Emphasis
May 2006
DS25BR400 Quad Transceiver with Input Equalization and Output De-Emphasis
General Description
The DS25BR400 is a quad 250 Mbps – 2.5 Gbps CML transceiver, or 8-channel buffer, for use in XAUI Fibre Channel backplane and cable applications. With operation down to 250 Mbps, the DS25BR400 can be used in applications requiring both low and high frequency data rates. Each input stage has a fixed equalizer to reduce ISI distortion from board traces. The equalizers are grouped in fours and are enabled through two control pins. These control pins provide customers flexibility in XAUI applications where ISI distortion may vary from one direction to another. All output drivers have four selectable steps of de-emphasis to compensate against transmission loss across long FR4 backplanes. The de-emphasis blocks are also grouped in fours. In addition, the DS25BR400 also has loopback control capability on four channels. All CML drivers and receivers are internally terminated with 50Ω pull-up resistors.
Features
n Quad 2.5 Gbps Transceiver or 8-Channel CML Serial Buffer n 250 Mbps – 2.5 Gbps Fully Differential Data Paths n Optional Fixed Input Equalization n Selectable Output De-emphasis n Individual Loopback Controls n On-chip Termination n +3.3V supply n Low Power, 1.3 Watts MAX n Lead-less eLLP-60 pin package (9mmx9mmx0.8mm, 0.4mm pitch) n −40˚C to +85˚C Industrial Temperature Range n 6 kV ESD Rating, HBM...
Similar Datasheet