1.0 Gbps LVDS Buffer / Repeater
DS10BR150 1.0 Gbps LVDS Buffer / Repeater
April 2007
DS10BR150 1.0 Gbps LVDS Buffer / Repeater
General Description
The...
Description
DS10BR150 1.0 Gbps LVDS Buffer / Repeater
April 2007
DS10BR150 1.0 Gbps LVDS Buffer / Repeater
General Description
The DS10BR150 is a single channel 1.0 Gbps LVDS buffer optimized for high-speed signal transmission over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. Wide input common mode range allows the receiver to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. The differential inputs and outputs are internally terminated with a 100Ω resistor to lower device input and output return losses, reduce component count and further minimize board space.
Features
■ DC - 1.0 Gbps low jitter, high noise immunity, low power
operation
■ On-chip 100Ω input and output termination minimizes
insertion and return losses, reduces component count and minimizes board space ■ 7 kV ESD on LVDS I/O pins protects adjoining components ■ Small 3 mm x 3 mm 8-LLP space saving package
Applications
■ ■ ■ ■
Clock and data buffering OC-12 / STM-4 Fibre Channel (1GFC) FireWire 800
Typical Application
30001710
© 2007 National Semiconductor Corporation
300017
www.national.com
DS10BR150
Block Diagram
30001701
Pin Diagram
30001702
Pin Descriptions
Pin Name NC IN+ INNC NC OUTOUT+ VCC GND Pin Name 1 2 3 4 5 6 7 8 DAP Pin Type NA Input Input...
Similar Datasheet