IR3084A
XPHASE
DESCRIPTION
The IR3084A Control IC combined with an IR XPhase Phase IC provides a full featured and flexi...
IR3084A
XPHASE
DESCRIPTION
The IR3084A Control IC combined with an IR XPhase Phase IC provides a full featured and flexible way to implement a complete VR10 or VR11 power solution. The “Control” IC provides overall system control and interfaces with any number of “Phase” ICs which each drive and monitor a single phase of a TM multiphase converter. The XPhase architecture results in a power supply that is smaller, less expensive, and easier to design while providing higher efficiency than conventional approaches.
TM
TM
Data Sheet No. PD. 94721
VR 10/11 CONTROL IC
FEATURES
www.DataSheet4U.com
1 to X phase operation with matching Phase IC Supports both VR11 8-bit VID code and extended VR10 7-bit VID code 0.5% Overall System Setpoint Accuracy VID Select pin sets the DAC to either VR10 or VR11 VID Select pin selects either VR11 or legacy VR10 type startups Programmable VID offset and Load Line output impedance Programmable VID offset function at the Error Amp’s non-inverting input allowing zero offset Programmable Dynamic VID Slew Rate ±300mV Differential Remote Sense Programmable 150kHz to 1MHz oscillator Enable Input with 0.85V threshold and 100mV of hysteresis VR Ready output provides indication of proper operation and avoids false triggering Phase IC Gate Driver Bias
Regulator / VRHOT Comparator Operates from 12V input with 9.9V Under-Voltage Lockout 6.9V/6mA Bias
Regulator provides System Reference Voltage Programmable Hiccup Over-Curre...