DatasheetsPDF.com

ISL5100A Dataheets PDF



Part Number ISL5100A
Manufacturers Intersil Corporation
Logo Intersil Corporation
Description Quad 18V Pin Electronics Driver/Window Comparator
Datasheet ISL5100A DatasheetISL5100A Datasheet (PDF)

® ISL55100A Data Sheet October 31, 2005 FN7486.0 Quad 18V Pin Electronics Driver/Window Comparator The ISL55100 is a Quad pin driver and window comparator fabricated in a wide voltage CMOS process. It is designed specifically for Test During Burn In (TDBI) applications, where cost, functional density, and power are all at a premium. This IC incorporates four channels of programmable drivers and window comparators into a small 72 Ld QFN package. Each channel has independent driver levels, data,.

  ISL5100A   ISL5100A



Document
® ISL55100A Data Sheet October 31, 2005 FN7486.0 Quad 18V Pin Electronics Driver/Window Comparator The ISL55100 is a Quad pin driver and window comparator fabricated in a wide voltage CMOS process. It is designed specifically for Test During Burn In (TDBI) applications, where cost, functional density, and power are all at a premium. This IC incorporates four channels of programmable drivers and window comparators into a small 72 Ld QFN package. Each channel has independent driver levels, data, and high impedance control. Each receiver has dual comparators which provide high and low threshold levels. The ISL55100 uses differential mode digital inputs, and can therefore mate directly with LVDS or CML outputs. Single ended logic families are handled by connecting one of the digital input pins to an appropriate threshold voltage (e.g., 1.4V for TTL compatibility). The comparator outputs are single ended, and the output levels are user defined to mate directly with any digital technology. The 18V driver output and receiver input ranges allow this device to interface directly with TTL, ECL, CMOS (3V, 5V, and 7V), LVCMOS, and custom level circuitry, as well as the www.DataSheet4U.com high voltage (Super Voltage) level required for many special test modes for Flash Devices. Features • Low Driver Output Resistance - ROUT Maximum: ISL55100A 7.0Ω • 18V I/O Range • 50MHz Operation • 4 Channel Driver/Receiver Pairs with Per Pin Flexibility • Dual Level - Per Pin - Input Thresholds • Differential or Single Ended Digital Inputs • User Defined Comparator Output Levels • Low Channel to Channel Timing Skew • Small Footprint (72 Ld QFN) • Pb-Free Plus Anneal Available (RoHS Compliant) Applications • Burn In ATE • Wafer Level Flash Memory Test • LCD Panel Test • Low Cost ATE • Instrumentation • Emulation • Device Programmers Functional Block Diagram QUAD - WIDE RANGE, LOW ROUT, TRI-STATEABLE - DRIVERS VH(0-3) DATA+(0-3) DATA-(0-3) DRVEN+(0-3) + + - DOUT(0-3) VL(0-3) Ordering Information PART NO. PART TEMP. MARKING RANGE (°C) PACKAGE -40 to +85 PKG. DWG. # DRVEN-(0-3) ISL55100AIRZ ISL55100 (See Note) AIRZ 72 Ld QFN L72.10x10 (Pb-free) Add “-T” suffix for tape and reel. NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. QUAD - DUAL LEVEL COMPARATOR - RECEIVERS COMP HIGH QA(0-3) COMP LOW CVA(0-3) VEE VCC VINP(0-3) VCC COMP HIGH QB(0-3) COMP LOW CVB(0-3) VEE 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005. .


ISL45042A ISL5100A ISL59481


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)