Ultra Low Power Multi I/O Microcontroller
EM MICROELECTRONIC - MARIN SA
EM6604
Ultra Low Power Multi I/O Microcontroller
Features
• Low Power - typical 1.7µA act...
Description
EM MICROELECTRONIC - MARIN SA
EM6604
Ultra Low Power Multi I/O Microcontroller
Features
Low Power - typical 1.7µA active mode - typical 0.3µA standby mode @ 1.5V, 32kHz, 25°C Low Voltage - 1.2 to 1.7V buzzer - 2kHz ROM - 1536×16bit (Mask Programmed) RAM - 72 × 4bit (User Read/Write) 2 clocks per instruction cycle RISC architecture 3 software configurable 4-bit ports 1 input port 1 high current output port 1 Input or Output port - bitwise Up to 8 outputs (2 ports) Voltage level detection (1.25V) Timer watchdog 8 bit timer Power On Reset - POR Internal interrupt sources (timer,prescaler) External interrupt sources (portA) Figure 1 Architecture
Description
The EM6604 series is an advanced single chip, mask programmed low-power low-voltage CMOS 4-bit microcontroller. It contains ROM, RAM, timer, prescaler, watchdog timer, voltage level detector and stepper motor driver capability. Its low voltage and low power operation make it the most suitable controller for battery, stand alone and mobile equipment. The EM66XX series is manufactured using EM Microelectronic’s Advanced Low Power (ALP) CMOS Process.
Figure 2 Pin Configuration
Typical
Applications
sensor interfaces domestic appliances security systems detectors automotive control clocks measurement equipment
03.02 REV. D/440
Copyright 2002, EM Microelectronic-Marin SA
1
www.emmicroelectronic.com
EM6604
EM6604 at a glance
Power Supply
- Low Voltage, low power archi...
Similar Datasheet