Document
Technical Data Sheet Photo-link Light Receiver Unit
PLR132
Features
1. High PD sensitivity optimized for red light 2. Data Rate up to 16Mbps at least (NRZ signal) 3. Low power consumption for extended battery life 4. Built-in threshold control for improved noise Margin 5. Good ESD protection: up to 8KV 6. Receiver sensitivity: up to –27dBm (Min.) 7. Pb Free
Descriptions
The optical receiver is packaged with custom optic data link interface, integrated on a proprietary CMOS PDIC process. The unit functions by converting optical signals into electric ones with data rate up to 16Mbps at least. The unit is operated at 5V and the signal output interface is TTL compatible with high performance at low power consumption.
Applications
1. Digital Optical Data-Link 2. Dolby AC-3 Digital Audio Interface
Everlight Electronics Co., Ltd. Device NO.: DPL-832-011
http://www.everlight.com Prepared date: 06-24-2004
Rev 1.1
Page: 1 of 7
Prepared By: Chin-Chia Hsu
PLR132
Package Dimensions
Pin Function 1 : Vout 2 : GND 3 : Vcc
3
2
1
Notes: 1.All dimensions are in mm. 2.General Tolerance: Pin length tolerance is ±0.25 mm others are ±0.10 mm
Everlight Electronics Co., Ltd. Device NO.: DPL-832-011
http://www.everlight.com Prepared date: 06-24-2004
Rev 1.1
Page: 2 of 7
Prepared By: Chin-Chia Hsu
PLR132
Absolute Maximum Ratings( Ta = 25ºC)
Parameter Supply Voltage Output Voltage Storage Temperature Operating Temperature Soldering Temperature * Soldering time ≤ 10 s. Symbol Vcc Vout Tstg Topr Tsol Rating 6 Vcc+0.3 -40 to 85 -20 to 70 260* Unit V V
ºC ºC ºC
Electro-Optical Characteristics(Ta= -20~70℃,Vcc=5±0.25V)
Parameter Power supply voltage Peak sensitivity wavelength Maximum receiver power Minimum receiver power Dissipation current High level output voltage Low level output voltage Rise time Fall time Propagation delay Low to High Propagation delay High to Low Pulse Width Distortion Jitter Transfer rate Symbol Vcc λp Pc,max Pc,min Icc VOH VOL tr tf tPLH tPHL ∆tw ∆tj T Conditions Refer to Fig.1 Refer to Fig.1 Refer to Fig.2 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3, Pc=-14dBm Refer to Fig.3, Pc=-27dBm
MIN. TYP. MAX. Unit 4.75 -27 2.4 5.00 650 4 4.8 0.2 10 15 -30 0.1 1 5 5.25 -14 12 0.4 20 20 120 120 +30 20 20 16 V nm dBm dBm mA V V ns ns ns ns ns ns ns Mb/s
NRZ signal
Everlight Electronics Co., Ltd. Device NO.: DPL-832-011
http://www.everlight.com Prepared date: 06-24-2004
Rev 1.1
Page: 3 of 7
Prepared By: Chin-Chia Hsu
PLR132
Measuring Method
*Fig.1 Measuring Method of Maximum and Minimum Input Power that Receiver Unit Need
Control Circuit
Standard plastic optic fiber cable Transmitter PLR132 Receiver Unit
Optical Power Meter
*Fig.2 Measuring Method of Dissipation Current
Standard plastic optic fiber cable Standard Transmitter unit Vin Vcc GND PLR132 Receiver Unit Vcc 0.47uF GND Vout
47uH Signal Input A 5V
16Mbps NRZ "0101" successive signal input
Everlight.