DatasheetsPDF.com

UG1003 Dataheets PDF



Part Number UG1003
Manufacturers Diodes Incorporated
Logo Diodes Incorporated
Description ULTRA-FAST GLASS PASSIVATED RECTIFIER
Datasheet UG1003 DatasheetUG1003 Datasheet (PDF)

UG1001 - UG1005 1.0A ULTRA-FAST GLASS PASSIVATED RECTIFIER Features · · · · · · · Glass Passivated Die Construction Diffused Junction Ultra-Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 30A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 A B A D DO-41 Dim A B C D Min 25.40 4.06 0.71 2.00 Max ¾ 5.21 0.864 2.72 C Mechanical Data · · · · · · Case: Molded Plastic Terminals: Plated .

  UG1003   UG1003


Document
UG1001 - UG1005 1.0A ULTRA-FAST GLASS PASSIVATED RECTIFIER Features · · · · · · · Glass Passivated Die Construction Diffused Junction Ultra-Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 30A Peak Low Reverse Leakage Current Plastic Material: UL Flammability Classification Rating 94V-0 A B A D DO-41 Dim A B C D Min 25.40 4.06 0.71 2.00 Max ¾ 5.21 0.864 2.72 C Mechanical Data · · · · · · Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 0.35 grams (approx.) Mounting Position: Any All Dimensions in mm Maximum Ratings and Electrical Characteristics www.DataSheet4U.com Single @ TA = 25°C unless otherwise specified phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Reverse Recovery Time (Note 3) Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range @ IF = 1.0A @ TA = 25°C @ TA = 100°C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM trr Cj RqJA Tj, TSTG 50 20 95 -65 to +150 1.0 5.0 100 75 10 UG1001 50 35 UG1002 100 70 UG1003 200 140 1.0 30 1.3 1.7 UG1004 400 280 UG1005 600 420 Unit V V A A V mA ns pF K/W °C Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. DS27008 Rev. A1-2 1 of 2 UG1001 - UG1005 I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 1.0 IF, INSTANTANEOUS FWD CURRENT (A) 10 0.8 UG1001 - UG1003 1.0 UG1004 0.6 0.4 0.1 UG1005 0.2 Single phase half-wave 60 Hz resistive or inductive load 0 25 0.01 Tj = 25°C Pulse width = 300µs 50 75 100 125 150 175 200 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 100 IFSM, PEAK FORWARD SURGE CURRENT (A) 20 Cj, CAPACITANCE (pF) UG1001 UG1004 10 10 UG1005 0 Pulse width = 8.3ms single half sine-wave (JEDEC Method) 1 Tj = 25°C f = 1.0MHz 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100 1 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr 100 50Ω NI (Non-inductive) Device Under Test 50V DC Approx 10Ω NI +0.5A (-) Pulse Generator (Note 2) (+) (-) 0A -0.25A 1.0Ω NI Oscilloscope (Note 1) (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS27008 Rev. A1-2 2 of 2 UG1001 - UG1005 .


UG1002 UG1003 UG1004


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)