Document
SGA-5289
Product Description
The SGA-5289 is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring 1 micron emitters provides high F T and excellent thermal perfomance. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. Cancellation of emitter junction non-linearities results in higher suppression of intermodulation products. Only 2 DC-blocking capacitors, a bias resistor and an optional RF choke are required for operation.
SGA-5289Z
Pb
RoHS Compliant & Green Package
DC-5000 MHz, Cascadable SiGe HBT MMIC Amplifier
The matte tin finish on Sirenza’s lead-free package utilizes a post annealing process to mitigate tin whisker formation and is RoHS Product Features compliant per EU Directive 2002/95. This package is also manu- • Now available in Lead Free, RoHS factured with green molding compounds that contain no antimony Compliant, & Green Packaging trioxide nor halogenated fire retardants.
i
Gain & Return Loss vs. Frequency
20 15 Gain (dB) 10 5 0 0 1
VD= 3.5 V, ID= 60 mA (Typ.)
0 -10 -20 Return Loss (dB)
• High Gain : 12.7 dB at 1950 MHz • Cascadable 50 Ohm • Operates From Single Supply • Low Thermal Resistance Package
GAIN ORL
Applications
• • • • PA Driver Amplifier Cellular, PCS, GSM, UMTS IF Amplifier Wireless Data, Satellite
IRL
-30 -40 2 3 4 Frequency (GHz) 5 6
Symbol G
Parameter Small Signal Gain
Units dB dB dB dBm dBm dBm dBm MHz dB dB dB V mA °C/W
Frequency 850 MHz 1950 MHz 2400 MHz 850 MHz 1950 MHz 850 MHz 1950 MHz
Min. 12.1
Typ. 13.4 12.7 12.5 15.8 14.4 31.8 28.1 5000
Max. 14.7
P1dB OIP3
Output Pow er at 1dB Compression Output Third Order Intercept Point
Bandw idth Determined by Return Loss (>10dB)
IRL ORL NF VD ID RTH, j-l
Input Return Loss Output Return Loss Noise Figure Device Operating Voltage Device Operating Current Thermal Resistance (junction to lead)
VS = 8 V RBIAS = 75 Ohms
1950 MHz 1950 MHz 1950 MHz 3.1 54
29.2 18.1 3.8 3.5 60 97 3.9 66
Test Conditions:
ID = 60 mA Typ. TL = 25ºC
OIP3 Tone Spacing = 1 MHz, Pout per tone = -5 dBm ZS = ZL = 50 Ohms
The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2001 Sirenza Microdevices, Inc.. All worldwide rights reserved.
303 Technology Court, Broomfield, CO 80021
Phone: (800) SMI-MMIC
1
http://www.sirenza.com
EDS-100616 Rev D
SGA-5289 DC-5000 GHz Cascadable MMIC Amplifier
Preliminary
Typical RF Performance at Key Operating Frequencies
Symbol Parameter Unit 100 500
Frequency (MHz) Frequency Frequency (MHz)(MHz) 850 1950
2400
3500
G OIP3 P1dB IRL ORL S12 NF
Small Signal Gain Output Third Order Intercept Point Output Power at 1dB Compression Input Return Loss Output Return Loss Reverse Isolation Noise Figure
dB dBm dBm dB dB dB dB
13.8
13.6 32.1 16.0
13.4 31.8 15.8 25.1 24.1 18.5 4.2
12.7 28.1 14.4 29.2 18.1 19.5 3.8
12.5 26.3 13.6 21.1 16.7 19.7 5.0
11.9
26.8 29.5 18.3
24.8 26.4 18.3 4.3
14.6 14.5 20.0
VS =8V V S= 8 V Test Conditions: Test Conditions: RBIAS = 75 Ohms R BIAS= 39 Ohms
= 60 mA Typ. IID D = 80 mA Typ. TLL = = 25ºC 25ºC T
OIP33 Tone Tone Spacing Spacing = =1 1 MHz, MHz, Pout Pout per per tone tone = =0 -5dBm dBm OIP ZS = ZL= = 50 50 Ohms Ohms Z S= ZL
Noise Figure vs. Frequency
VD=3.5 V, ID= 60 mA (Typ.)
7 6 5 4 3
Absolute Maximum Ratings
Parameter Max. Device Current (ID) Max. Device Voltage (VD) Absolute Limit
120 mA
5V +16 dBm
+150°C -40°C to +85°C +150°C
Noise Figure (dB)
Max. RF Input Power Max. Junction Temp. (TJ)
Operating Temp. Range (TL)
Max. Storage Temp.
TL=+25ºC
2 0 0.5 1 1.5 2 Frequency (GHz) 2.5 3
Operation of this device beyond any one of these limits may cause permanent damage. For reliable continous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: IDVD < (TJ - TL) / RTH, j-l
OIP3 vs. Frequency
VD= 3.5 V, ID= 60 mA (Typ.)
40 35 OIP3 (dBm) P1dB (dBm) 30 25 20 18 16 14 12
P1dB vs. Frequency
VD= 3.5 V, ID= 60 mA (Typ.)
TL=+25ºC
20 0 0.5 1 1.5 2 Frequency (GHz) 2.5 3
TL=+25ºC
10 0 0.5 1 1.5 2 Frequency (GHz) 2.5 3
303 Technology Court, Broomfield, CO 80021
Phone: (800) SMI-MMIC
2
http://www.sirenza.com
EDS-100616 Rev. D
SGA-5289 DC-5000 GHz Cascadable MMIC Amplifier
Preliminary
|S | vs. Frequency
21
|S | vs. Frequency
11
20 15 S21(dB)
VD= 3.5 V, ID= 60 mA (Typ.)
0 -10 S11(dB) -20 -30
VD= 3.5 V,.