LT1229

U U FEATURES s 100MHz Bandwidth s 1000V/µs Slew Rate s Low Cost s 30mA Output Drive Current s 0.04% Differential Gain s 0.1° Differential Phase s High Input Impedance: 25MΩ, 3pF s Wide Supply Range: ±2V to ±15V s Low Supply Current: 6mA Per Amplifier s Inputs Common Mode to Within 1.5V of Supplies s Outputs Swing Within 0.8V of Supplies U APPLICATIO S s Video Instrumentation Amplifiers s Cable Drivers s RGB Amplifiers s Test Equipment Amplifiers LT1229/LT1230 Dual and Quad 100MHz Current Feedback Amplifiers DESCRIPTIO The LT®1229/LT1230 dual and quad 100MHz current feedback amplifiers are designed for maximum performance in small packages. Using industry standard pinouts, the dual is available in the 8-pin miniDIP and the 8-pin SO package while the quad is in the 14-pin DIP and 14-pin SO. The amplifiers are designed to operate on almost any available supply voltage from 4V (±2V) to 30V (±15V). These current feedback amplifiers have very high input impedance and make excellent buffer amplifiers. They maintain their wide bandwidth for almost all closed-loop voltage gains. The amplifiers drive over 30mA of output current and are optimized to drive low impedance loads, such as cables, with excellent linearity at high frequencies. The LT1229/LT1230 are manufactured on Linear Technology’s proprietary complementary bipolar process. For a single amplifier like these see the LT1227 and for better DC accuracy see the LT1223. , LTC and LT are registered trademarks of Linear Technology...