DatasheetsPDF.com

SY87701AL Dataheets PDF



Part Number SY87701AL
Manufacturers Micrel Semiconductor
Logo Micrel Semiconductor
Description AnyRate Clock and Data Recovery
Datasheet SY87701AL DatasheetSY87701AL Datasheet (PDF)

Micrel, Inc. 3.3V 28Mbps to 1.3Gbps AnyRate® Clock and Data Recovery SY87701AL SY87701AL FEATURES DESCRIPTION s Industrial temperature range (–40°C to +85°C) s 3.3V power supply s Clock and data recovery from 28Mbps up to 1.3Gbps NRZ data stream, clock generation from 28Mbps to 1.3Gbps s Complies with Bellcore, ITU/CCITT and ANSI specifications for applications such as OC-1, OC-3, OC-12, ATM, FDDI, Fibre Channel and Gigabit Ethernet as well as proprietary applications s Two on-chip PLLs: on.

  SY87701AL   SY87701AL



Document
Micrel, Inc. 3.3V 28Mbps to 1.3Gbps AnyRate® Clock and Data Recovery SY87701AL SY87701AL FEATURES DESCRIPTION s Industrial temperature range (–40°C to +85°C) s 3.3V power supply s Clock and data recovery from 28Mbps up to 1.3Gbps NRZ data stream, clock generation from 28Mbps to 1.3Gbps s Complies with Bellcore, ITU/CCITT and ANSI specifications for applications such as OC-1, OC-3, OC-12, ATM, FDDI, Fibre Channel and Gigabit Ethernet as well as proprietary applications s Two on-chip PLLs: one for clock generation and another for clock recovery s Selectable reference frequencies s Differential PECL high-speed serial I/O s Line receiver input: no external buffering needed s Link fault indication s 100k ECL compatible I/O s Lower power: fully compatible with Micrel's SY87701V, but with 30% less power s Available in 32-pin EPAD-TQFP and 28-pin SOIC packages (28-pin SOIC is available, but NOT recommended for new designs.) The SY87701AL is a complete Clock Recovery and Data Retiming integrated circuit for data rates from 28Mbps up to 1.3Gbps NRZ. The device is ideally suited for SONET/SDH/ATM and Fibre Channel applications and other high-speed data transmission systems. Clock recovery and data retiming is performed by synchronizing the on-chip VCO directly to the incoming data stream. The VCO center frequency is controlled by the reference clock frequency and the selected divide ratio. On-chip clock generation is performed through the use of a frequency multiplier PLL with a byte rate source as reference. The SY87701AL also includes a link fault detection circuit. All support documentation can be found on Micrel’s web site at: www.micrel.com. APPLICATIONS s SONET/SDH/ATM OC-1, OC-3, OC-12, OC-24 s Fibre Channel, Escon, SMPTE 259 s Gigabit Ethernet/Fast Ethernet s Proprietary architecture up to 1.3Gbps BLOCK DIAGRAM PLLR P/N RDINP (PECL) RDINN CD (PECL) REFCLK (TTL) PHASE DETECTOR PHASE/ FREQUENCY DETECTOR 0 1 CHARGE PUMP VCO PHASE/ FREQUENCY DETECTOR CHARGE PUMP VCO LINK FAULT DETECTOR 1 0 DIVIDER BY 8, 10, 16, 20 DIVSEL 1/2 (TTL) AnyRate is a registered trademark of Micrel, Inc. M9999-082107 [email protected] or (408) 955-1690 SY87701AL PLLS P/N FREQSEL 1/2/3 (TTL) 1 CLKSEL (TTL) RDOUTP (PECL) RDOUTN RCLKP (PECL) RCLKN LFIN (TTL) TCLKP (PECL) TCLKN VCC VCCA VCCO GND Rev.: G Amendment: /0 Issue Date: August 2007 Micrel, Inc. SY87701AL PACKAGE/ORDERING INFORMATION VCCA 1 LFIN 2 DIVSEL1 3 RDINP 4 RDINN 5 FREQSEL1 6 REFCLK 7 FREQSEL2 8 FREQSEL3 9 N/C 10 PLLSP 11 PLLSN 12 GNDA 13 GND 14 28 VCC 27 CD 26 DIVSEL2 25 RDOUTP 24 RDOUTN 23 VCCO 22 RCLKP 21 RCLKN 20 VCCO 19 TCLKP 18 TCLKN 17 CLKSEL 16 PLLRP 15 PLLRN 28-Pin SOIC (Z28-1) Ordering Information Part Number SY87701ALZI SY87701ALHI SY87701ALZG Package Type Z28-1 H32-1 Z28-1 Operating Range Industrial Industrial Industrial SY87701ALHG(1) H32-1 Industrial Note: 1. Pb-Free package recommended for new designs. Package Marking SY87701ALZI SY87701ALHI SY87701ALZG with Pb.


SY69753AL SY87701AL SY87702L


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)