DatasheetsPDF.com

NC12S0A0H06 Dataheets PDF



Part Number NC12S0A0H06
Manufacturers Delta Electronics
Logo Delta Electronics
Description DC/DC Power Modul
Datasheet NC12S0A0H06 DatasheetNC12S0A0H06 Datasheet (PDF)

FEATURES High Efficiency: 91% @ 12Vin, 5V/6A out Size: 30.5x15.5x11.7mm (1.20”×0.61”×0.46”) -- Vertical 30.5x15.5x12.3mm (1.20”×0.61”×0.48”) -- Horizontal Voltage and resistor-based trim No minimum load required Output voltage programmable from 0.9Vdc to 5.0Vdc via external resistors Fixed frequency operation Input UVLO, output, OCP, SCP Power good output signal Remote ON/OFF ISO 9001, TL 9000, ISO 14001, QS9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized,.

  NC12S0A0H06   NC12S0A0H06


Document
FEATURES High Efficiency: 91% @ 12Vin, 5V/6A out Size: 30.5x15.5x11.7mm (1.20”×0.61”×0.46”) -- Vertical 30.5x15.5x12.3mm (1.20”×0.61”×0.48”) -- Horizontal Voltage and resistor-based trim No minimum load required Output voltage programmable from 0.9Vdc to 5.0Vdc via external resistors Fixed frequency operation Input UVLO, output, OCP, SCP Power good output signal Remote ON/OFF ISO 9001, TL 9000, ISO 14001, QS9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized, and TUV (EN60950) Certified Delphi NC06 Series Non-Isolated Point of Load DC/DC Power Modules: 12Vin, 0.9V~5.0Vout, 6A www.DataSheet4U.com OPTIONS Vertical or horizontal versions The Delphi NC06 Series, 12V input, single output, non-isolated point of load DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. The NC06 series operates from a 12V nominal input, provides up to 6A of power in a vertical or horizontal mounted through-hole package and the output can be resistor- or voltage-trimmed from 0.9Vdc to 5.0Vdc. It provides a very cost effective point of load solution. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. APPLICATIONS DataCom Distributed power architectures Servers and workstations LAN/WAN applications Data processing applications DATASHEET DS_NC12S06A_02072007 TECHNICAL SPECIFICATIONS (Ambient Temperature=25°C, minimum airflow=200LFM, nominal Vin=12Vdc unless otherwise specified.) PARAMETER ABSOLUTE MAXIMUM RATINGS Input Voltage Operating Temperature (Vertical) Operating Temperature (Horizontal) Storage Temperature Input/Output Isolation Voltage INPUT CHARACTERISTICS Operating Input Voltage Input Under-Voltage Lockout Turn-On Voltage Threshold Turn-Off Voltage Threshold Lockout Hysteresis Voltage Maximum Input Current No-Load Input Current Off Converter Input Current Input Reflected-Ripple Current Input Ripple Rejection OUTPUT CHARACTERISTICS Output Voltage Adjustment Range Output Voltage Set Point Output Voltage Regulation Over Load Over Line Output Voltage Ripple and Noise Peak-to-Peak RMS Output Current Range Output Voltage Over-shoot at Start-up Output Voltage Under-shoot at Power-Off Output DC Current-Limit Inception Output Short-Circuit Current DYNAMIC CHARACTERISTICS Output Dynamic Load Response Positive Step Change in Output Current Negative Step Change in Output Current Settling Time Turn-On Transient Start-Up Time, from On/Off Control Start-Up Time, from input power Minimum Output Capacitance Maximum Output Startup Capacive Load Minimum Input Capacitance EFFICIENCY Vo=0.9V Vo=1.2V Vo=1.5V Vo=1.8V Vo=2.5V Vo=3.3V Vo=5.0V FEATURE CHARACTERISTICS Switching Frequency ON/OFF Control Logic High Logic Low GENERAL SPECIFICATIONS MTBF Weight NOTES and CONDITIONS Min. With appropriate air flow and derating, see Figs 33 With appropriate air flow and derating, see Figs 39 Non-isolated 10.2 -40 -40 -40 NC12S0A0V/H06 Typ. Max. 14 130 125 125 NA 12.0 9.4 8.1 1.3 13.8 Units Vdc °C °C °C V V V V V A mA mA mA dB V % % % mV mV A % mV A 100% Load, 10.2Vin, 5.0Vout Vin=12V, Vout=5V Remote OFF Refer to Figure 31. 120Hz 0.9 -3 -1.0 -0.2 0.9V-2.5V 3.3V-5.0V 0 Vin=12V, Turn ON Vin=12V, Turn OFF Hiccup mode Hiccup mode 12Vin, 100nF ceramic, 10µF tantalum load cap, 10A/µs 50% Io_max to 75% Io_max 75% Io_max to 50% Io_max Settling to be within regulation band (Vo +/- 2.5%) From Enable high to 10% of Vo From Vin=12V to 10% of Vo Ex: OSCON 6.3V/680µF (ESR 13 mΩ max.) Full Load Ex: OSCON 16V/270µF (ESR 18 mΩ max.) Vin=12V, Io=6A Vin=12V, Io=6A Vin=12V, Io=6A Vin=12V, Io=6A Vin=12V, Io=6A Vin=12V, Io=6A Vin=12V, Io=6A Fixed Positive logic (internally pulled high) Module On (or leave the pin open) Module Off Telcordia SR-332 Issue1 Method1 Case3 at 50°C 7 3.27 56 14 60 60 5.0 +3 +1.0 +0.2 40 50 20 6 1 100 With a 1.0% trim resistor Io=Io_min to Io_max Vin=Vin_min to Vin_max 5Hz to 20MHz bandwidth Full Load, 100nF ceramic, 10µF tantalum Full Load, 100nF ceramic, 10µF tantalum 75 75 200 10 10 680 TBD 270 71 76 79 81 85 88 91 300 2.4 0 1.7 7.1 5.5 0.8 mV mV µs ms ms µF µF µF % % % % % % KHz V V M hours grams DS_NC12S06A_02072007 2 ELECTRICAL CHARACTERISTICS CURVES 90 80 70 60 50 40 30 20 10 0 0.0 1.0 2.0 10.2 12 13.8 90 80 70 60 50 40 30 20 10 0 0.0 1.0 Efficiency (%) Efficiency (%) 10.2 12 13.8 3.0 4.0 5.0 6.0 2.0 3.0 4.0 5.0 6.0 Output Current (A) Output Current (A) Figure 1: Converter efficiency vs. output current (0.9V output voltage) Figure 2: Converter efficiency vs. output current (1.2V output voltage) 90 80 70 60 50 40 30 20 10 0 0.0 1.0 2.0 100 Efficiency (%) Efficiency (%) 80 60 40 20 0 10.2 12 13.8 10.2 12 13.8 3.0 4.0 5.0 6.0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Output Current (A) Output Current (A) Figure 3: Co.


NC12S0A0V06 NC12S0A0H06 NC12S0A0V15


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)