G703B

T 1-3/4 (5 mm) Panel Mount Led Assembly G70B, G71B and G703B Series These panel mount assemblies are designed to snap into a nominal 1/4” hole from the front of the panel. The G70B and G703B have wires attached. These wires are UL 1061, 26 AWG, PVC insulated multi-strand wire with 3 mm ends stripped & tinned. The G70B is two-leaded and comes in all variations of dice and color, including bi-color (2 dice mounted back-to-back). The G703B incorporates a three-leaded LED with two dice in a common cathode configuration. It is available either as Red/Green, EG, or as Yellow/Green, YG. Series resistors can be added for operation at non-standard voltages. 1.5x4.5x0.2 3 pls G70B(2-leaded) or G703B(3-leaded) 5.0 dia 7.1 dia 0.8 4.2 ±.5 11.3 6.1 dia L = total length of wire G71B Anode Black Red G70B schematic 1.0 min Color Black Color G703B schematic 15.0 min Specify part desired as follows: G70B/Order Code-L (Wire length in inches; 6" and 24" are standard) G71B/Order Code; G703B/EG or YG-L. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type Color Red TInted Diffused Resistor Required Hi Eff Red Green Yellow Hi Eff Red Tinted Transparent High Brightness Green Yellow Red Tinted Diffused For 2mA Operation Hi Eff Red Green Yellow Hi Eff Red Tinted Diffused 5V Operation Green Yellow Hi Eff Red Tinted Diffused 12V Operation Green Yellow Hi Eff Red/Grn White Diffused Bipolar, Bicolor Yellow/Green Red/Green Order Code H I G Y IT GT YT H2 I2 G2 Y2 I5 G5 Y5 ...