THREE PHASE BRIDGE PEM
ISO-9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP. FEATURES:
600V/200A THREE PHASE BRIDGE PEM WITH BRAKE
4851
(315) 701-675...
Description
ISO-9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP. FEATURES:
600V/200A THREE PHASE BRIDGE PEM WITH BRAKE
4851
(315) 701-6751
4707 Dey Road Liverpool, N.Y. 13088
MIL-PRF-38534 CERTIFIED
Full Three Phase Bridge Configuration with SCR/IGBT Brake 600V Rated Voltage 200A Continuous Output Current Internal Zener Clamps on Gates Proprietary Encapsulation Provides Near Hermetic Performance MIL-PRF-38534 Screening Available (Modified) Light Weight Domed ALSIC Baseplate Robust Mechanical Design for Hi-Rel Applications Ultra-Low Inductance Internal Layout Withstands 96 Hours HAST and Thermal Cycling (-55°C to +125°C)
DESCRIPTION:
The MSK 4851 is one of a family of plastic encapsulated modules (PEM) developed specifically for use in military, aerospace and other severe environment applications. The Three Phase Bridge configuration along with the SCR/IGBT brake circuit and 600 volt/200 amp rating make it ideal for use in high current motor drive and inverter applications. The Aluminum Silicon Carbide (AlSiC) baseplate offers superior flatness and light weight; far better than the copper or copper alloys found in most high power plastic modules. The high thermal conductivity materials used to construct the MSK 4851 allow high power outputs at elevated baseplate temperatures. Our proprietary coating, SEES™ - Severe Environment Encapsulation System - protects the internal circuitry of MSK PEM's from moisture and contamination, allowing them to pass the rugged environmental screening require...
Similar Datasheet