DPS-200PB-143

w w w. d e l t a w w. c o m DPS-200PB-143 Series 125 (W) x 63.5 (H) x 100 (L) mm FEATURES Complies with SFX 12V V2.1 Remote On/Off High Reliability Low Acoustic Noise Built-in EMI Filter Meets IEC 60950: 1999/UL 60950 3rd Edition TTL Compatible Power Good Signal All Outputs SELV (Safety Extra Low Voltage) Fan Speed Control Function Inside Optional PFC Circuit ENVIRONMENTAL MTBF: >100,000 hours at Max. Load, 115Vac and 25 ambient conditions www.DataSheet4U.com Dielectric Withstand: Input to Output: 2100Vac for 1 sec Input to Frame Ground: 2100Vac for 1 sec ESD: IEC 61000-4-2 Surge: IEC 61000-4-5 Harmonic: IEC 61000-3-2 Class D ELECTRICAL SPECIFICATIONS Input Input Range Frequency Input Current Efficiency EMI/RFI 90-135/180-265Vac, Switch-Select 47-63Hz 5A @ 115Vac; 2.5A @ 230Vac >68% @ Max. Load, Nominal Line FCC Part 15 Class B CISPR 22 Class B Output Maximum Power 200 Watts Holdup Time >17mS @ Max. Load, Nominal Line Rise Time 0.2mS ~ 20mS Leakage Current <0.75mA @ 250Vac Overvoltage Protection: +3.3V, +5V, +12V, -12V Overcurrent Protection: <240VA Short-Circuit Protection: Latch off all main outputs reset by cycling On/Off control or AC power. Power Good Signal: TTL/CMOS compatible on delay 100mS to 500mS, off delay 1mS munimum. Output V1 V2 V3 V4 V5 Voltage +3.3V +5V +12V -12V +5Vsb Regulation +/-5% +/-5% +/-5% +/-10% +/-5% Minimum Load 0.5A 0.5A 0.5A 0A 0A Maximum Load 16.7A 16.0A 10.0A 0.3A 2.0A Peak Load 13.0A - Ripple & Noise Vp-p 50mV 50mV 120mV 120mV 50...