Document
Bulletin I2233 rev. A 11/05
SAFEIR Series 40TTS12PbF
PHASE CONTROL SCR
Lead-Free ("PbF" suffix)
Description/ Features
The 40TTS12PbF SAFEIR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reliable operation up to 140°C junction temperature. Typical applications are in input rectification (soft start) and these products are designed to be used with International Rectifier input diodes, switches www.DataSheet4U.com and output rectifiers which are available in identical package outlines.
VT ITSM
< 1.6V @ 80A = 350A
VRRM = 1200V
Major Ratings and Characteristics Characteristics
IT(AV) Sinusoidal waveform IRMS VRRM / VDRM ITSM VT dv/dt di/dt T
J
Package Outline Units
A
Values
25
40 1200 350 TJ = 25°C 1.6 500 150 - 40 to 140
A V A V V/µs A/µs °C
TO-220
www.irf.com
1
40TTS12PbF SAFEIR Series
Bulletin I2233 rev. A 11/05
Voltage Ratings
VRRM, maximum Part Number peak reverse voltage V
40TTS12PbF 1200
VDRM , maximum peak direct voltage V
1200
TJ °C
-25 to 140
Absolute Maximum Ratings
Parameters
IT(AV) Max. Average On-state Current IRMS ITSM
2
40TTS..
25 40 300 350 450 630
Units
A
Conditions
@ TC = 93° C, 180° conduction half sine wave
Max. RMS On-state Current Max. Peak One Cycle Non-Repetitive Surge Current
10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied A s
2
I t
Max. I t for fusing
2
10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied
I2√t VTM rt
Max. I 2√t for fusing Max. On-state Voltage Drop On-state slope resistance
6300 1.6 11.4 0.96 0.5 10 100 200 500 150
A2√s V mΩ V mA
t = 0.1 to 10ms, no voltage reapplied @ 80A, TJ = 25°C TJ = 140°C
VT(TO) Threshold Voltage IRM/IDM Max.Reverse and Direct Leakage Current IH IL Holding Current Max. Latching Current
TJ = 25 °C TJ = 140 °C
VR = rated VRRM/ VDRM
mA mA V/µs A/µs
Anode Supply = 6V, Resistive load, Initial IT = 1A Anode Supply = 6V, Resistive load
dv/dt Max. Rate of Rise of off-state Voltage di/dt Max. Rate of Rise of turned-on Current
2
www.irf.com
40TTS12PbF SAFEIR Series
Bulletin I2233 rev. A 11/05
Triggering
Parameters
PGM Max. peak Gate Power PG(AV) Max. average Gate Power + IGM Max. paek positive Gate Current - VGM Max. paek negative Gate Voltage IGT Max. required DC Gate Current to trigger VGT Max. required DC Gate Voltage to trigger VGD IGD Max. DC Gate Voltage not to trigger Max. DC Gate Current not to trigger 0.2 1.5 mA TJ = 140°C, VDRM = rated value TJ = 140°C, VDRM = rated value 1.3 V Anode supply = 6V, resistive load, TJ = 25°C
40TTS..
8.0 2.0 1.5 10 35
Units
W
Conditions
A V mA Anode supply = 6V, resistive load, TJ = 25°C
Switching
Parameters
tgt trr tq Typical turn-on time Typical reverse recovery time Typical turn-off time
40TTS..
0.9 4 110
Units
µs TJ = 25°C TJ = 140°C
Conditions
Thermal-Mechanical Specifications
Parameters
TJ Tstg Max. Junction Temperature Range Max. Stor.