Low Power Video Difference Amplifier
LT1189 Low Power Video Difference Amplifier
FEATURES
s s s s s s s s s s s
DESCRIPTIO
Differential or Single-Ended Gai...
Description
LT1189 Low Power Video Difference Amplifier
FEATURES
s s s s s s s s s s s
DESCRIPTIO
Differential or Single-Ended Gain Block (Adjustable) –3dB Bandwidth, AV = ± 10 35MHz Slew Rate 220V/µs Low Supply Current 13mA Output Current ± 20mA CMRR at 10MHz 48dB LT1193 Pin Out Low Cost Single 5V Operation Drives Cables Directly Output Shutdown
The LT1189 is a difference amplifier optimized for operation on ± 5V, or a single 5V supply, and gain ≥ 10. This versatile amplifier features uncommitted high input impedance (+) and (–) inputs, and can be used in differential or single-ended configurations. Additionally, a second set of inputs give gain adjustment and DC control to the difference amplifier. The LT1189’s high slew rate, 220V/µs, wide bandwidth, 35MHz, and ± 20mA output current require only 13mA of supply current. The shutdown feature reduces the power dissipation to a mere 15mW, and allows multiple amplifiers to drive the same cable. The LT1189 is a low power, gain of 10 stable version of the popular LT1193, and is available in 8-pin miniDIPs and SO packages. For lower gain applications see the LT1187 data sheet.
APPLICATI
s s s s
S
Line Receivers Video Signal Processing Cable Drivers Tape and Disc Drive Systems
TYPICAL APPLICATI
Cable Sense Amplifier for Loop Through Connections with DC Adjust
VIN 5V 3 CABLE VDC 2 1 8 – LT1189 + – 4 –5V 909Ω
Closed-Loop Gain vs Frequency
50 VS = ±5V RL = 1k
40
VOLTAGE GAIN (dB)
+
7 6 VOUT
30
20
10
100Ω
0 0.1
LT1189 TA01
U
1 ...
Similar Datasheet