MUN2131T1

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MUN2111T1/D Bias Resistor Transistor PNP Silicon Surface Mount Transistor with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base–emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SC–59 package which is designed for low power surface mount applications. Simplifies Circuit Design Reduces Board Space Reduces Component Count The SC–59 package can be soldered using wave or reflow. The modified gull–winged leads absorb thermal stress during soldering eliminating the possibility of damage to the die. Available in 8 mm embossed tape and reel Use the Device Number to order the 7 inch/3000 unit reel. R1 PIN2 R2 BASE (INPUT) PIN1 EMITTER (GROUND) PIN3 COLLECTOR (OUTPUT) MUN2111T1 SERIES Motorola Preferred Devices PNP SILICON BIAS RESISTOR TRANSISTOR 3 2 1 CASE 318D–03, STYLE 1 (SC–59) MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating Collector–Base Voltage Collector–Emitter Voltage Collector Current Total Power Dissipation @ TA = 25°C(1) Derate above 25°C www.DataSheet4U.com Symbol VCBO VCEO IC PD Val...