MUN2111RT1

LESHAN RADIO COMPANY, LTD. Bias Resistor Transistor PNP Silicon Surface Mount Transistor with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base–emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SC–59 package which is designed for low power surface mount applications. Simplifies Circuit Design Reduces Board Space Reduces Component Count The SC–59 package can be soldered using wave or reflow. The modified gull–winged leads absorb thermal stress during soldering eliminating the possibility of damage to the die. Available in 8 mm embossed tape and reel Use the Device Number to order the 7 inch/3000 unit reel. PIN3 Collector (Output) MUN2111RT1 MUN2112RT1 MUN2113RT1 MUN2114RT1 MUN2115RT1 MUN2116RT1 MUN2130RT1 MUN2131RT1 MUN2132RT1 MUN2133RT1 MUN2134RT1 PNP SILICON BIAS RESISTOR TRANSISTOR 3 PIN2 base (Input) R1 R2 2 1 PIN2 Emitter www.DataSheet4U.com (Ground) CASE 318–03 , STYLE 1 ( SC – 59 ) MAXIMUM RATINGS (T A = 25°C unless otherwise noted) Rating Collector-Base Voltage Collector-Emitter Voltage Collector Current Total Power Dissipation @ T A = 25°C (1) Derate ab...