One-Time Digitally Programmable 32 Tap Potentiometer
CAT5126
One-Time Digitally Programmable 32 Tap Potentiometer
FEATURES
Wiper position stored after one-time nonvolatile...
Description
CAT5126
One-Time Digitally Programmable 32 Tap Potentiometer
FEATURES
Wiper position stored after one-time nonvolatile programming User-defined Power-On wiper position 32 tap positions Wiper position programmed through simple 2-wire serial interface Low 0.35µA (typ) static supply current 2.5V to 5.5V single-supply operation 10kΩ, 50kΩ, and 100kΩ end-to-end resistances 50ppm/°C end-to-end temperature coefficient and 5ppm/°C ratiometric temperature coefficient 8-Pin TDFN (2mm x 3mm) and MSOP packages
DESCRIPTION
The CAT5126 is a digital programmable potentiometer. The wiper position is controlled with a simple 2-wire digital interface. This digital potentiometer is unique in that it has an optional onetime programmable feature that either sets the wiper’s position upon power-on to a user-defined value, or the wiper can be set and the interface also disabled to prevent further adjustment. The CAT5126 has an end-to-end resistance of 10kΩ, 50kΩ, and 100kΩ. All CAT5126 devices have 32 wiper positions and operate from a single 2.5V to 5.5V supply. The CAT5126 is available in 8-pin TDFN and MSOP packages. Each device is guaranteed over the industrial temperature range of -40°C to +85°C. For Ordering Information details, see page 10.
APPLICATIONS
Mechanical potentiometer replacement Contrast, brightness, volume controls Programmable analog functions Products using one-time factory calibration
www.DataSheet4U.com
PIN CONFIGURATION
MSOP (Z) (top view)
RW ¯¯...
Similar Datasheet