TECHNICAL DATA
TELEPHONE SPEECH NETWORK WITH DIALER INT`ERFACE
FEATURES
- Low DC line voltage; operates down to 1.6V (e...
TECHNICAL DATA
TELEPHONE SPEECH NETWORK WITH DIALER INT`ERFACE
FEATURES
- Low DC line voltage; operates down to 1.6V (excluding polarity guard) - Voltage
regulator with adjustable static resistance - Provides a supply for external circuits - Symmetrical high-impedance inputs (64 kΩ) for dynamic, magnetic or piezo-electric microphones - Asymmetrical high-impedance input (32 kΩ) for electret microphones - DTMF signal input with confidence tone - Mute
ILA1062/1062A
PIN CONNECTION
LN
1
16 15
SLPE AGC REG
GAS1 2 GAS2 OR GAR MICMIC+ STAB 3 4 5 6 7 8
14
input for pulse or DTMF dialing - ILA1062: active HIGH (MUTE) - ILA1062A: active LOW (MUTE)
ILA1062 or BT1062A ILA1062A
13 12
VCC MUTE DTMF IR VEE
11 10 9
- Receiving amplifier for dynamic, magnetic or piezo-electric earpieces - Large gain setting range on microphone and earpiece amplifiers - Line loss compensation (line current dependent) for microphone and earpiece amplifiers - Gain control curve adaptable to exchange supply - DC line voltage adjustment facility
DESCRIPTION
www.DataSheet4U.com
The ILA1062 and ILA1062A are integrated circuits that perform all speech and line interface functions required in fully electronic telephone sets. They perform electronic switching between dialing and speech. The ICs operates at line voltage down to 1.6 V DC (with reduced performance) to facilitate the use of more telephone sets connected in parallel. All statements and values refer to all versions unless otherwise specified....