CS8371

www.DataSheet4U.com CS8371 8.0 V/1.0 A, 5.0 V/250 mA Dual Regulator with Independent Output Enables and NOCAPt The CS8371 is an 8.0 V/5.0 V dual output linear regulator. The 8.0 V ±5.0% output sources 1.0 A, while the 5.0 V ±5.0% output sources 250 mA. Each output is controlled by its own ENABLE lead. Setting the ENABLE input high turns on the associated regulator output. Holding both ENABLE inputs low puts the IC into sleep mode where current consumption is less than 10 mA. The regulator is protected against overvoltage, short−circuit and thermal runaway conditions. The device can withstand 45 V load dump transients making suitable for use in automotive environments. ON’s proprietary NOCAP solution is the first technology which allows the output to be stable without the use of an external capacitor. The CS8371 is available in a 7 lead TO−220 package with copper tab. The tab can be connected to a heatsink if necessary. Features http://onsemi.com TO−220 SEVEN LEAD T SUFFIX CASE 821E 1 7 1 TO−220 SEVEN LEAD TVA SUFFIX CASE 821J PIN CONNECTIONS AND MARKING DIAGRAM Tab = GND Pin 1. ENABLE1 2. ENABLE2 3. VOUT2 4. GND 5. Sense 6. VCC 7. VOUT1 Two Regulated Outputs − 8.0 V ±5.0%; 1.0 A − 5.0 V ±5.0%; 250 mA Independent ENABLE for Each Output Seperate Sense Feedback Lead for 8.0 V Output < 10 mA Sleep Mode Current Fault Protection − Overvoltage Shutdown − +45 V Peak Transient Voltage − Short Circuit − Thermal Shutdown CMOS Compatible, Low Current ENABLE Inputs Pb−...