DatasheetsPDF.com

CS1108

Part Number	CS1108
Manufacturer	ON Semiconductor
Description	Single Lamp Driver IC
Published	Apr 7, 2007
Detailed Description	com CS1108 Single Lamp Driver IC This ASIC provides up to 350 mA of drive current for powering bulbs. T...
Datasheet	CS1108 PDF File

Overview

com CS1108 Single Lamp Driver IC This ASIC provides up to 350 mA of drive current for powering bulbs.
The typical application for this part is for use in airbag systems using a type 194 bulb.
On–chip diagnostics provide open circuit and short circuit detection in the output on mode.
In addition, the output driver will turn on (sink current) when VCC is low.
Fault is an active–low output which reports in the output–on mode.
Internal pull–up circuitry is provided to ensure the output pin turns on when the Control pin is floating.
Features • Fault Detection – Open Circuit – Short Circuit – Overtemperature • VCC Sense: Output Turns On with Loss of VCC • Low Standby Current • Int...

Similar Datasheet

CS11-E2GA222MYNS Disk Ceramic Capacitors - TDK
CS1100L Current Sensors - Coilcraft
CS1101 DIMENSIONS SCHEMATIC & PC LAYOUT - CIT Relay
CS1102 CIT SWITCH - ETC
CS1107 Single Relay Driver IC - Cherry Semiconductor Corporation
CS1107 Single Relay Driver IC - ON Semiconductor
CS1108 Single Lamp Driver IC - Cherry Semiconductor Corporation
CS1108 Single Lamp Driver IC - ON Semiconductor
CS1109 CIT SWITCH - CIT Relay
CS1110 DIMENSIONS SCHEMATIC & PC LAYOUT - CIT Relay

Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)