DatasheetsPDF.com

ZL60006 Dataheets PDF



Part Number ZL60006
Manufacturers Zarlink Semiconductor
Logo Zarlink Semiconductor
Description 2.5 Gbps PIN with Preamplifier
Datasheet ZL60006 DatasheetZL60006 Datasheet (PDF)

ZL60006 1310 nm, 1550 nm 2.5 Gbps PIN with Preamplifier Data Sheet April 2004 Ordering Information ZL60006TED SC Housing ZL60006/TBD TO-46 with lens ZL60006/TDD ST Housing -40 °C to +85 °C Features • • • • • • Data rate up to 3.125 Gbps 1310 nm, 1550 nm PIN photodiode TO-46 Assembly Integrated TIA and limiting amplifier Single 3.3 V supply Low power consumption Description This optical receiver is a 3.3 V device which contains a PIN photodiode and a low noise transimpedance with limiting ampl.

  ZL60006   ZL60006



Document
ZL60006 1310 nm, 1550 nm 2.5 Gbps PIN with Preamplifier Data Sheet April 2004 Ordering Information ZL60006TED SC Housing ZL60006/TBD TO-46 with lens ZL60006/TDD ST Housing -40 °C to +85 °C Features • • • • • • Data rate up to 3.125 Gbps 1310 nm, 1550 nm PIN photodiode TO-46 Assembly Integrated TIA and limiting amplifier Single 3.3 V supply Low power consumption Description This optical receiver is a 3.3 V device which contains a PIN photodiode and a low noise transimpedance with limiting amplifier in a TO-46 package with lens cap. It is designed for OC-48 operation and single mode fiber. Reliability Assurance based on Telcordia GR-468CORE. Applications • • • • Sonet OC-48 SDH STM-16 2.125 Gbps fiber channel 2.5 to 3.125 Gbps general application Figure 1 - Pin Diagram Figure 2 - Functional Schematic 1 Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2003- 2004, Zarlink Semiconductor Inc. All Rights Reserved. ZL60006 Optical and Electrical Characteristics Parameter Responsivity, differential Output voltage amplitude, differential Bandwidth (3 dBel) Optical Saturation Level Noise-Equivalent Power Sensitivity (BER 10-9) Symbol R Min. 4 200 Typ. 6 300 2.0 1 -35 -25 -30 -23 Max. Unit kV/W mVpp GHz dBm dBm dBm Data Sheet Test Condition λ=1310 nm, RL=100 Ω, Note 1 RL=100 Ω Note 2 Pf = 10 µW, RL=100 Ω λ=1310 nm, ER = ∞ Note 3 λ=1310 nm, Note 4 λ=1310 nm, ER = ∞ ∆ VO fc Psat NEP S Note 3 Dynamic Range Output Resistance (single) Power Dissipation Power Supply Current Ro PD IDD PRBS Pattern 223 -1 at 2.5 Gbps. Note Note Note Note 1: 2: 3: 4: Pf = 10 µW Peak-Peak Power Pf = 500 µW Peak-Peak Power Measured at 10 -10 BER with a 2 23 -1 PRBS at 2.5 Gbps Measured with STM-16 filter on electrical output, i.e., 1.875 GHz 24 50 85 25 140 38 dB Ω mW mΑ Data & Data AC Coupled Operating Conditions:25°C Case Temperature/3.3 V Supply Voltage/Fiber: Single-mode 10/125 µm fiber. Absolute Maximum Ratings Parameter Supply Voltage Storage Temperature Symbol VCC Tstg Min. 0 -40 Max. 3.6 125 Unit V °C Recommended Operating Conditions Parameter Supply Voltage Operating Temperature Signalling Rate, Note 5 Note 5: Symbol VCC-VEE Top Min. 3 -40 Typ. 3.3 Max. 3.6 85 Unit V °C Gbps fD 1 3.125 Data pattern are to have maximum runlength and DC-balance shifts no more than that of a PRBS-31 pattern. 2 Zarlink Semiconductor Inc. ZL60006 Typical Responsivity Wavelength Differential responsivity Differential responsivity 1310 nm 1550 nm Data Sheet Fiber core/cladding diameter numerical aperture 10/125 µm, NA=0.11 6 kV/W 7.4 kV/W Typical Responsivity vs Axial Displacement for a Singelmode Fiber 100 90 Relative Responsivity (%) 80 70 60 50 40 30 20 10 0 0 0.5 1 1.5 2 2.5 3 z-Axial Displacem ent of Fiber (m m ) at r_opt, relative TO46 lens Figure 3 - Typical Responsivity vs Axial Displacement for a Singlemode Fiber 3 Zarlink Semiconductor Inc. ZL60006 Data Sheet Typical Responsivi.


ZL60003 ZL60006 ZL60007


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)