STLVDS104

www.DataSheet4U.com STLVDS104 4-PORT LVDS AND 4-PORT TTL-TO LVDS REPEATERS s s s s s s s s RECEIVER AND DRIVERS MEET OR EXCEED THE REQUIREMENTS OF ANSI EIA/TIA-644 STANDARD, RECEIVERS DIFFERENTIAL INPUT LEVELS, ±100mV DESIGNED FOR SIGNALING RATES UP TO 630Mbps OPERATES FROM A SINGLE 3.3V SUPPLY LOW VOLTAGE DIFFERENTIAL SIGNALING WITH TYPICAL OUTPUT VOLTAGE OF 350mV AND A 100Ω LOAD PROPAGATION DELAY TIME: 3.1ns (TYP) ELECTRICALLY COMPATIBLE WITH LVDS, PECL, LVPECL, LVTTL, LVCOMOS, GTL, BTL, CTT, SSTL, OR HSTL OUTPUTS WITH EXTERNAL NETWORK BUS TERMINAL ESD (HBM) EXCEEDS 7KV SO AND TSSOP PACKAGING SOP TSSOP DESCRIPTION The STLVDS104 is a differential line receiver and a LVTTL input connected to four differential line drivers that implement the electrical characteristics of low voltage differential signaling, for point to point baseband data transmission over controlled impedance media of approximately 100Ω. The transmission media can be printed-circuit board traces, backplanes, or cable. ORDERING CODES Type STLVDS104BD STLVDS104BDR STLVDS104BTR Temperature Range -40 to 85 °C -40 to 85 °C -40 to 85 °C LVDS, as specified in EIA/TIA-644 is a data signaling technique that offers low-power, low noise coupling, and switching speed to transmit data at a speed up to 630Mbps at relatively long distances. The drivers integrated into the same substrate, along with the low pulse skew of balanced signaling, allow extremely precise timing alignment of the signals repeated from the i...