CMOS Dual H-Bridge Driver
www.DataSheet4U.com
R&E International
RE46C102
CMOS Dual H-Bridge Driver
Product Specification
General Description
The...
Description
www.DataSheet4U.com
R&E International
RE46C102
CMOS Dual H-Bridge Driver
Product Specification
General Description
The RE46C102 is a dual H-bridge driver with 35mA drive current and 16V VBB maximum driver supply voltage. A separate low-side driver ground connection, Vss, is provided for current monitoring of each H-bridge driver. Each driver has two control inputs: ENABLE which enables the high-side drivers and therefore connects the driver supply to the motor output. This input can be used for pulse-width modulation. PHASE which is used to reverse the motor polarity. All control inputs are CMOS and TTL compatible and the logic section operates at Vdd=5V.
Features
Typical Quiescent Current < 1uA Output Current of 35mA Output Voltage to 16V Internal Clamp Diodes Available in Standard Packaging or RoHS compliant Pb free packaging
Pin Configuration
16 Lead Plastic DIP
VBB ENABLEA PHASEA GND GND OUT1A OUT2A VSSA
1
16
VDD ENABLEB PHASEB GND GND OUT1B OUT2B VSSB
Absolute maximum ratings
Supply Voltage Vdd ........………………………………….......-.5V to +17V Output Supply Voltage Vbb……………………………………. VDD to +17V Input voltage Range Vin ...…………………………………..... -.3V to VDD+.3V Input Current Iin ..............…………………………………..... 10mA Operating Temperature .......………………………………….. -40°C to 85°C Storage Temperature..….....………………….……………….. -55°C to 150°C Continuous Output Current …………… ………………….….. 80mA
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage ...
Similar Datasheet