CEPT/T1 Input Transformer
www.DataSheet4U.com
CEPT/T1
TEW5111 is designed and approved to be used as a receive transformer with the following dev...
Description
www.DataSheet4U.com
CEPT/T1
TEW5111 is designed and approved to be used as a receive transformer with the following devices: MITEL MT89760 MT89790
Input Transformer
Complies with ANSI T1.408 and CCITT I.431 for Longitudinal Balance and T1.408, G.703 & BS6328 for Return Loss. Typical applications are: Primary rate ISDN network nodes. PBX or computer to T1/CEPT Digital Trunks. TDM Multiplexers.
TEW5111
Low profile Surface Mount.
MECHANICAL Com. 1 3 6
2.54 (6 places) 9.6
Top view White dot at pin 1
12.2
All dimensions are in mm.
75 Ω 7 100 & 120 Ω 8
Device 4 5
0.6 9.1 1.9
Recommended foot print 5.2 max 1.27
2.54 7.62
12.7
ELECTRICAL SPECIFICATION Line Impedance
5111.chp
TEW5111 - 1 100 Ω
-2 120 Ω 1 : 1 : 1.26 —> 1.2
-3 75 Ω 1:1:1 —> 0. 7
-4 75/120 Ω 1 : 1 : 1.26 1:1:1 > 1.2
Turns ratio Inductance (mH) DCR (Ohms) Longitud. Bal. Return Loss Pulse Mask
(3-6):(4-5):(1-8) (3-6):(4-5):(1-7) (1-8) (1 - 8) (3 - 5)
1:1:1 —> 2.0
ISSUE: H
96/08/08
T.408 T.408 T1 1500
I.431 G.703 CEPT 1500
I.431 G.703 BS6328 CEPT 1500
I.431 G.703 BS6328 CEPT 1500
Dielectric Strength (Vrms)
Filtran Limited
229 Colonnade Road, Nepean, Ontario, Canada. K2E 7K3, Tel : (613) 226 -1626 Fax : (613) 226 -7124
2-28
...
Similar Datasheet