Octal Transparent Latch
www.DataSheet4U.com
54AC373 • 54ACT373 Octal Transparent Latch with TRI-STATE Outputs
August 1998
54AC373 • 54ACT373 ...
Description
www.DataSheet4U.com
54AC373 54ACT373 Octal Transparent Latch with TRI-STATE Outputs
August 1998
54AC373 54ACT373 Octal Transparent Latch with TRI-STATE ® Outputs
General Description
The ’AC/’ACT373 consists of eight latches with TRI-STATE outputs for bus organized system applications. The flip-flops appear transparent to the data when Latch Enable (LE) is HIGH. When LE is LOW, the data that meets the setup time is latched. Data appears on the bus when the Output Enable (OE) is LOW. When OE is HIGH, the bus output is in the high impedance state.
Features
n n n n n n ICC and IOZ reduced by 50% Eight latches in a single package TRI-STATE outputs for bus interfacing Outputs source/sink 24 mA ’ACT373 has TTL-compatible inputs Standard Microcircuit Drawing (SMD) — ’AC373: 5962-87555 — ’ACT373: 5962-87556
Logic Symbols
IEEE/IEC
DS100329-1
DS100329-2
Pin Names D0–D7 LE OE O0–O7
Description Data Inputs Latch Enable Input Output Enable Input TRI-STATE Latch Outputs
TRI-STATE ® is a registered trademark of National Semiconductor Corporation. FACT ® is a registered trademark of Fairchild Semiconductor Corporation.
© 1998 National Semiconductor Corporation
DS100329
www.national.com
Connection Diagrams
Pin Assignment for DIP and Flatpak
Pin Assignment for LCC
DS100329-4
DS100329-3
Functional Description
The ’AC/’ACT373 contains eight D-type latches with TRI-STATE standard outputs. When the Latch Enable (LE) input is HIGH, data on the Dn inputs enters the latches. In t...
Similar Datasheet