SAL

www.DataSheet4U.com Sharma Tantalum Capacitors RoHS Compliant SAL SERIES INTRODUCTION The SAL Series Tantalum Chip Capacitors are designed to cover high capacitance values with low losses in case sizes "D" and "E". This Series is suitable for special application requiring Low ESR,DF and DCL. FEATURES: LOW ESR, DF AND DC LEAKAGE CURRENT. HIGH RIPPLE CURRENT CARRYING CAPABILITY. HIGH SOLDER HEAT RESISTANCE - 269°C, 5 TO 10 SECS. REEL PACKING STDS- EIA-481-1 AND REELING PER IEC 286-3 IN 7” STANDARD COMPONENT REELS. MOLDED COMPONENTS WITH CONSISTENT DIMENSIONS AND SURFACE FINISH. EPOXY ENGINEERED FOR AUTOMATIC ONSERTION. COMPATIBLE WITH ALL POPULAR HIGH SPEED ASSEMBLY MACHINES. GENERAL SPECIFICATIONS CAPACITANCE RANGE: 10 µF To 330 µF. VOLTAGE RANGE: 6.3 VDC to 35 VDC. CAPACITANCE TOLERANCE: ±20%(M), ±10%(K), (±5%(J) - UPON REQUEST). TEMPERATURE RANGE: -55 TO +125°C WITH DERATING ABOVE 85°C. ENVIRONMENTAL CLASSIFICATION: 55/125/56 (IEC68-2). DISSIPATION FACTOR: 10 TO 68 µF 4% MAX, 100 TO 330 µF 4% MAX. LEAKAGE CURRENT: PLEASE REFER TO RATINGS TABLE ON FOLLOWING PAGE. FAILURE RATE: 1% PER 1000 HRS. LIFE TEST DETAILS CAPACITORS SHALL WITHSTAND RATED DC VOLTAGE APPLIED AT 85°C FOR 2000 HRS OR DERATED DC VOLTAGE APPLIED AT 125°C FOR 1000 HRS. AFTER THE TEST: 1. CAPACITANCE CHANGE SHALL NOT EXCEED ±10% OF INITIAL VALUE. 2. DISSIPATION FACTOR SHALL BE WITHIN THE NORMAL SPECIFIED LIMITS. 3. DC LEAKAGE CURRENT SHALL BE WITHIN 125% OF NORMAL LIMIT. 4. NO REMARKABLE CHANGE ...