MAX7452

www.DataSheet4U.com 19-3267; Rev 2; 11/04 Video-Signal Conditioners with AGC and Back-Porch Clamp General Description The MAX7450/MAX7451/MAX7452 complete front-end video-signal conditioners are designed to improve the quality of standard-definition video signals. The devices restore the DC level of the video input, correct for amplitude errors up to ±6dB, detect fault conditions, and filter out-of-band noise. The MAX7450/MAX7451/ MAX7452 optimize the signal quality for further video processing through a crosspoint switch or video decoder (ADC). Each device integrates an input video clamp, automatic gain control (AGC), loss-of-sync (LOS) detector, and an out-of-band noise/lowpass filter. These devices also incorporate a user-selectable buffer gain (0 or +6dB) and an AGC-disable function. The MAX7450 and MAX7451 operate from dual power supplies of ±5V or ±3.3V respectively, and they restore the video blanking level to GND. The MAX7452 operates from a single +5V supply and features a user-adjustable clamp level. The devices are available in an 8-pin SO package with an exposed pad and are specified for operation over the extended (-40°C to +85°C) temperature range. Features ♦ Back-Porch Clamp to GND (MAX7450/MAX7451) ♦ Adjustable Back-Porch Clamp (MAX7452) ♦ Automatic Gain Control (±6dB Range) Normalizes Signals to Standard Video Level ♦ Input Fault Detection with LOS Output ♦ Inherent 50Hz/60Hz Input Rejection of 60dB ♦ Single-Supply Operation: MAX7452 (+5V) ♦ Out-of-Band Noi...