www.DataSheet4U.com
TS7900A series
3-Terminal Fixed Negative Output Voltage Regulator
TO-263
Pin assignment: 1. Ground...
www.DataSheet4U.com
TS7900A series
3-Terminal Fixed Negative Output Voltage
Regulator
TO-263
Pin assignment: 1. Ground 2. Input 3. Output (Heatsink surface connected to Pin 2)
Voltage Range - 5V to - 24V Output Current up to 1.5A
General Description
The TS7900A series of fixed output negative voltage
regulators are intended as complements to the popular TS7800A series device. These negative
regulators are available in the same seven-voltage options as the TS7800A devices. Available in fixed output voltage options from -5.0 to -24 volts, these
regulators employ current limiting, thermal shutdown, and safe-area compensation--making them remarkably rugged under most operating conditions. With adequate heat sink they can deliver output currents in excess of 1.5 ampere. This series is offered in 3-pin TO-220, TO-263 package.
Features
Output current up to 1.5A No external components required Internal thermal overload protection Internal short-circuit current limiting Output
transistor safe-area compensation Output voltage offered in +/-2% tolerance
Standard Application
Ordering Information
Part No.
TS79xxACZ TS79xxACM
Operating Temp. (Ambient)
o -20 ~ +85 C
Package
TO-220 TO-263
Note: Where xx denotes voltage option.
A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate voltage. * =...