CYNA25

www.DataSheet4U.com POWER COMPONENTS Applications Motor Control Overvoltage Crowbar Protection Capacitive Discharge Ignition Voltage Regulation Welding Equipment Capacitive Filter Soft Start (Inrush Current Control) > Suitable for General Purpose AC Switching > IGT 40mA Max. > Isolated and Non-Isolated Tab > VDRM/VRMM 400, 600, 800, 1000V CYNA/CYNB25 25Amp - 400/600/800/1000V - SCR CONDITIONS SYMBOL RATING Absolute Maximum Ratings RMS On-State Current (full sine wave) Average On-State Current Non Repetitive Surge Peak On-State Current (Full Cycle, Tj Initial = 25˚C) I2 t Value for fusing K A G Tc = 100˚C Tc = 75˚C Tc = 100°C Tc = 75°C TO-220AB TO-220AB Iso TO-220AB TO-220AB Iso F = 50 Hz F = 60 Hz tp = 10 ms IT(RMS) IT(AV) ITSM I2 t di/dt 25A 16A 320A 350A 510A2s 100A/µs 4A 1W -40 to +150˚C -40 to +125˚C 2500VRMS 5V Critical rate of rise of on-state current IG=2 x IGT , tr<100 ns, Tj = 125˚C Peak Gate Current @ Tj = 125˚C Average Gate Power Dissipation @ Tj = 125˚C A TO-220AB Isolated (CYNA25) tp = 20 µs IGM PG(AV) Tstg Tj VISO VRGM Storage Temperature Range Operating Junction Temperature Range Isolation Voltage (CYNA Series only) K A G Maximum Peak Reverse Gate Voltage TO-220AB Non-Isolated (CYNB25) Electrical Characteristics NOTE 1 IGT MAX @ VD =12 V, RL = 30Ω 40mA 1.3V Tj = 125˚C 0.2V 50mA 90mA Tj = 125˚C Tj = 25˚C Tj = 25˚C Tj = 125˚C 1000V/µs 1.6V 5µA 4mA VGT MAX @ VD =12 V, RL = 30Ω VGD MIN @ VD =VDRM, RL = 3.3kΩ IH MAX @ IT = 500 mA (gat...