Document
www.DataSheet4U.com Ordering number : ENN6944A
SBS805
Schottky Barrier Diode
SBS805
30V, 1A Rectifier
Applications
•
Package Dimensions
unit : mm 1294
[SBS805]
2.9 5 4 3 0.6
High frequency rectification (switching regulators, converters, choppers).
Features
•
•
•
1 0.95
2 0.4
0.6
1.6
2.8
•
Low forward voltage (IF=0.5A, VF max=0.40V) (IF=1.0A, VF max=0.47V). Short reverse recovery time(trr max.=15ns). Composite type with 2 low VF SBDs in one package, facilitating high-density mounting. The SBS805 is composed of 2 chips that are equivalent to the SBS005.
0.05
5
4
3
0.4
0.7
0.9
Electrical Connection
1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode SANYO : CPH5
1
2
1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature Symbol VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle Conditions Ratings 30 30 1 10 --55 to +125 --55 to +125 Unit V V A A °C °C
Marking : SD
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
N0901 GI IM / 31901GI IM No.6944-1/3
0.2
0.2
0.15
SBS805
Electrical Characteristics at Ta=25°C
Parameter Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time Thermal Resistance Symbol VR VF1 VF2 IR C trr Rth(j-a) IR=1mA IF=0.5A IF=1A VR=15V VR=10V, f=1MHz IF=IR=100mA, See specified Test Circuit. Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings min 30 0.35 0.42 35 15 110 0.40 0.47 500 typ max Unit V V V µA pF ns °C/W
trr Test Circuit
Duty≤10%
100mA 10mA
5V
100mA
10µs
50Ω
100Ω
10Ω
trr
10 7 5
IF -- VF
Reverse Current, IR -- mA
Forward Current, IF -- A
3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 0
100 7 5 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 0 5
IR -- VR
5°C Ta=12
100°C
75°C
50°C
25°C
Ta= 100 125°C ° 75° C C 50° C 25° C
0.1
0.2
0.3
0.4
0.5
0.6 IT00627 1000 7 5
10
15
20
25
30 IT00628
Forward Voltage, VF -- V
Average Forward Power Dissipation, PF(AV) -- W
1.0 0.9 0.8 0.7 0.6 0.5
Reverse Voltage, VR -- V
PF(AV) -- IO
C -- VR
f=1MHz
Interterminal Capacitance, C -- pF
(1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° (1)
3 2 100 7 5 3 2 10 7 5 3 2
(2) (4)
(3)
Rectangular wave
0.4 0.3 0.2 0.1 0 0 0.2 0.4 0.6 0.8
θ
360°
Sine wave
180° 360° 1.0
1.2
1.4 IT00629
1.0 1.0
2
3
5
7
10
2
3
5
Average Forward Current, IO -- A
Reverse Voltage, VR -- V
7 100 IT00630
No.6944-2/3
SBS805
12
IS -- t
Current waveform 50Hz sine wave Is 20ms t
Surge Forward Current, IFSM(Peak) -- A
10
8
6
4
2
0 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3
Time, t -- s
IT00631
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such prod.