LU6000F0

www.DataSheet4U.com LU6000F0/LU6000F1 LU6000F0/LU6000F1 DESCRIPTION The LU6000F0/F1 are single-chip 16-bit microcomputers, flash memory versions of SM6000 series. LU6000F0 is packaged in 100-pin QFP and LU6000F1 in 100-pin LQFP (0.5 mm pin-pitch). , The LU6000F0/F1 s internal flash memory is user programmable : it can be programmed using a PROM writer, through the serial interface (UART) (on-board writing), or by copying data stored in a PROM by using the copy board designed for this purpose. LU6000F0/F1 are compatible with SM6000 series which contains ROM instead of flash memory. LU6000F0/F1 can be programmed to operate as ROM version. Once the program has been imported into the ROM, the user can run the program without having to verify it. 16-Bit Single-Chip Microcomputers (With Built-In Flash Memory) the resultant data can also successively be stored. System clock cycle : 0.133 µs (MIN.) (VDD = 4.5 to 5.5 V, at 30 MHz main clock cycle) 0.2 µs (MIN.)(VDD = 2.7 to 3.6 V, at 20 MHz main clock, single chip mode) Selectable system clocks divided by 2 up to 16 main clocks for low power operation. Built-in main clock oscillator for system clock Interrupts : Total 27, software interrupts 24 maskable interrupts (external 4, internal 20) 3 nonmaskable interrupts A nonmaskable interrupt, when used in conjunction with BST instruction, can trigger the software reset. Standby function : Halt mode/Stop mode I/O ports x 88/specific purpose function pin x 3 : Input ports...