KCUSB3

www.DataSheet4U.com K KAWASAKI LSI KCUSB3 USB Controller – Quick Interface General Description The Kawasaki KCUSB3 Controller is a quick single chip solution to interface peripheral devices to the Universal Serial Bus (USB). The KCUSB3 has been specifically designed to provide a simple and fast method of designing interfaces for peripheral devices to the USB port. This has been accomplished by its highly integrated functionality and flexible General Purpose I/O (GPIO) that can be configured to your system requirements. This device has been configured with a wide range of capabilities for your immediate use or evaluation. The device can then be reconfigured for your specific application. You can directly access the embedded processor’s address and data lines to use external programmable logic for evaluation before configuring the GPIO for your final device. The SIE (Serial Interface Engine) is fully compatible with the USB specification. Features Advanced 16 Bit processor for USB transaction processing and control data processing USB interface ver 1.0/1.1 compliant Transceivers and SIE (Serial Interface Engine) Internal Clock Generation Utilizes low cost external crystal circuitry 1.5K x 16 Internal RAM buffer 2 IRQ 8 Channel, 10 Bit A/D External Memory Interface for direct access to the 16-bit processor for using external logic or memory. General purpose I/O Watchdog timer PWM Output Support 8K user programmable gates 8K bytes ROM I2C Interface 100 pin ...