DatasheetsPDF.com

CHTB12 Dataheets PDF



Part Number CHTB12
Manufacturers Crydom Corporation
Logo Crydom Corporation
Description High Temperature Triacs
Datasheet CHTB12 DatasheetCHTB12 Datasheet (PDF)

www.DataSheet4U.com POWER COMPONENTS Applications • Heat Regulation • Ovens • Coffee Makers • Cookers • Light Dimming • Control of Inductive Loads • Motors • Transformers > Superior Commutating Performance at High Temperature (di/dt)c = 12A/ms @ (dv/dt)c = 50V/µs > Ideal for Most Demanding Applications > Alternistor/No Snubber Type > IGT 35 mA Max. > VDRM/VRMM 400, 600, 800V High Temperature 150˚C Series 12Amp - 400/600/800V - TRIAC CONDITIONS SYMBOL RATING CHTA/CHTB12 Absolute Maximum Rat.

  CHTB12   CHTB12


Document
www.DataSheet4U.com POWER COMPONENTS Applications • Heat Regulation • Ovens • Coffee Makers • Cookers • Light Dimming • Control of Inductive Loads • Motors • Transformers > Superior Commutating Performance at High Temperature (di/dt)c = 12A/ms @ (dv/dt)c = 50V/µs > Ideal for Most Demanding Applications > Alternistor/No Snubber Type > IGT 35 mA Max. > VDRM/VRMM 400, 600, 800V High Temperature 150˚C Series 12Amp - 400/600/800V - TRIAC CONDITIONS SYMBOL RATING CHTA/CHTB12 Absolute Maximum Ratings RMS On-State Current (full sine wave) Non Repetitive Surge Peak On-State Current (Full Cycle, Tj Initial = 25˚C) I2 t Value for fusing Critical rate of rise of on-state current IG=2 x IGT, tr<100 ns, Tj = 150˚C A1 A2 Tc = 130˚C Tc = 120˚C TO-220AB TO-220AB Iso F =50 Hz F =60 Hz tp = 10 ms IT(RMS) ITSM I2 t di/dt 12A 140A 145A 112A2s 100A/µs 4A 1W -40 to +150˚C -40 to +150˚C 2500 VRMS Peak Gate Current @ Tj = 150˚C G tp = 20 µs IGM PG(AV) Tstg Tj VISO TO-220AB Isolated (CHTA12) Average Gate Power Dissipation @ Tj = 150˚C Storage Temperature Range Operating Junction Temperature Range A2 Isolation Voltage (CHTA Series only) Electrical Characteristics A1 A2 G IGT MAX @ VD =12 V, RL = 30Ω NOTE 1 VGT MAX @ VD =12 V, RL = 30Ω VGD MIN @ VD =VDRM, RL = 3.3kΩ IH MAX @ IT = 100 mA NOTE 2 A2 QI-II-III QI-II-III Tj = 150˚C QI-II-III QI-III Q-II Tj = 150˚C 35mA 1.3V 0.15V 35mA 50mA 80mA 300V/µs 12A/ms TO-220AB Non-Isolated (CHTB12) IL MAX @ IG = 1.2 IGT IL MAX @ IG = 1.2 IGT dv/dt MIN @ VD = 67%VDRM (gate open) NOTE 2 Tj = 150˚C G A1 (di/dt)c MIN without snubber NOTES 2 & 4 Static Characteristics VT MAX @ ITM =17 A, tp = 380µs NOTE 2 Vto MAX @ Threshold Voltage Rd MAX @ Dynamic Resistance NOTE 2 IDRM MAX @ VDRM = VRRM IRRM MAX @ VDRM = VRRM GENERAL NOTES 1. 2. 3. 4. Minimum IGT is guaranted at 5% of IGT max. For both polarities of A2 referenced to A1 All parameters at 25 degrees C unless otherwise specified. Commutating dv/dt = 50V/µs, (exponential to 200Vpk) NOTE 2 Tj = 25˚C Tj = 150˚C Tj = 150˚C Tj = 25˚C Tj = 150˚C 1.5V 0.8V 25mΩ 5µA 5.5mA ISO9001 Certified www.DataSheet4U.com High Temperature 150˚C Series 12Amp - 400/600/800V - TRIAC CHTA/CHTB12 SYMBOL RATING Thermal Resistances Junction to Case (AC) Junction to Case (AC) Junction to Ambient Junction to Ambient TO-220AB TO-220AB Isolated TO-220AB TO-220AB Isolated Rth(j-c) Rth(j-c) Rth(j-a) Rth(j-a) 1.4˚C/W 2.3˚C/W 60˚C/W 60˚C/W Part Number Designation D F G SERIES N K L A Rated Current 12: 12 Amp Packaging Blank: Bulk PT: Plastic Tube CHT 12 Isolation Type A: Isolated B: Non-Isolated Maximum Blocking Voltage 400: 400Vpk 600: 600Vpk 800: 800Vpk M B P O C I 14 12 10 18 16 14 E J Q H IT(RMS) [A] P [W] 12 10 8 6 4 2 0 Isolated Non-Isolated 8 6 4 2 Weight: 2.3g (0.08 oz) Dimensions Millimeters REF. Min. Typ. A 15.24 B 3.23 C 12.78 D 9.96 E 0.69 F 1.22 G 4.62 H 0.46 I 2.49 J 2.39 K 6.48 L 3.78 M 15.49 16 N 2.59 O 0.99 P 0.99 Q 2.67 Inches Max. Min. Typ. 15.75 0.6 0.127 13.79 0.503 10.36 0.392 0.94 0.027 1.32 0.048 4.83 0.182 0.61 0.018 2.84 0.098 2.69 0.094 6.88 0.255 3.89 0.149 16.51 0.61 0.63 2.9 0.102 1.55 0.039 1.55 0.039 0.105 Max. 0.62 0.543 0.408 0.037 0.052 0.19 0.024 0.112 0.106 0.271 0.153 0.65 0.114 0.061 0.061 0 0 2 4 6 8 10 12 14 16 18 60 70 80 90 100 110 120 130 140 150 160 IT(RMS) [A] Fig. 1: Power dissipation versus RMS on-state current (full cycle). TC [˚C] Fig. 2: RMS on-state current versus case temperature (full cycle) 250 160 120 100 80 60 50 40 30 20 100.0 10.0 ITSM [A] ITM [A] Non-Repetitive Tj initial = 25˚C 1.0 10 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 1 10 100 1000 VTM [V] Fig. 3: On-state current versus on-state voltage (instantaneous values) Number of Cycles Fig. 4: Non-repetitive surge peak on-state current versus number of cycles. ISO9001 Certified Approvals UL Recognized Component - E72445 (For CHTA series) USA Sales Support (877) 502-5500 Tech Support (877) 702-7700 Fax (619) 710-8540 Email: [email protected] Crydom Corp 2320 Paseo de las Americas, Suite 201 San Diego, CA 92154 EUROPE - UK Telephone +44 (0) 1202 365070 Fax +44 (0) 1202 365090 Email: [email protected] Crydom International Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Germany Telephone +49 (0) 180 3000 506 ASIA - Thailand Telephone +66 (0)2 665 2517 Fax +66 (0)2 665 2588 Crydom Asia 18/8 Fico Place 12th Floor Soi Sukhumvit 21 (Asoke) Klongtoey Nua, Wattana Bangkok, Thailand 10110 © 2004 Crydom Corp, All Rights Reserved. Specifications are subject to change without prior notice. Crydom and the Crydom logo are trademarks of Crydom Corp. CrydomCHT12_L0205.pdf .


CHTA12 CHTB12 CHTA16


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)