16/32-bit ARM microcontroller with external memory interface
7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
supply voltage (1.2 V)
supply voltage (1.8 V)
supply voltage (3.0 V)
analog supply voltage (3.0 V)
in 1.8 V range
in 3.0 V range
VIA analog input voltage
VI input voltage
1.8 V pins
3.0 V pins
total power dissipation (per
per supply pin
per ground pin
based on package
heat transfer, not
electrostatic discharge voltage
 The following applies to Table 4:
a) This product includes circuitry speciﬁcally designed for the protection of its internal devices from the damaging effects of excessive
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.
b) Parameters are valid over operating temperature range unless otherwise speciﬁed. All voltages are with respect to VSS unless
 Core, PLL, oscillator, and RTC supplies; applies to pins VDD_CORE12_01 to VDD_CORE12_08, VDD_COREFXD12_01 to
VDD_COREFXD12_02, VDD_OSC12, VDD_PLL397_12, VDD_PLLHCLK_12, VDD_PLLUSB_12, VDD_RTC12, VDD_RTCCORE12,
VDD_RTCOSC12, and VDD12.
 I/O pad supply; applies to pins VDD_IO18_01 to VDD_IO18_04 and VDD_SDRAM18_01 to VDD_SDRAM18_09.
 I/O pad supply; applies to pins VDD_IO28_01 to VDD_IO28_02 and VDD28.
 Applies to VDD_AD28 pins.
 Applies to pins VDD_IO1828_01 to VDD_IO1828_012 and VDD1828.
 Including voltage on outputs in 3-state mode.
 Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 kΩ series resistor.
Preliminary data sheet
Rev. 02 — 15 February 2007
© NXP B.V. 2007. All rights reserved.
28 of 36