DS1033

www.DataSheet4U.com DS1033 3-in-1 Low Voltage Silicon Delay Line www.dalsemi.com FEATURES All-silicon timing circuit Three independent buffered delays Initial delay tolerance ±1.5 ns Stable and precise over temperature and voltage Leading and trailing edge precision preserves the input symmetry Standard 8-pin DIP, 8-pin SOIC Vapor phasing, IR and wave solderable Available in Tape and Reel PIN ASSIGNMENT IN1 IN2 IN3 GND 1 2 3 4 8 7 6 5 VCC OUT1 OUT2 OUT3 DS1033M 8-Pin DIP See Mech. Drawings Section IN1 IN2 IN3 GND 1 2 3 4 8 7 6 5 VCC OUT1 OUT2 OUT3 DS1033Z 8-Pin SOIC (150-mil) See Mech. Drawings Section PIN DESCRIPTION IN1-IN3 OUT1-OUT3 NC VCC GND (Sub) - Input Signals - Output Signals - No Connection - Supply Voltage - Ground - Internal substrate connection, do not make any external connections to these pins DESCRIPTION The DS1033 series is a low-power +3.3 Volt version of the DS1035. It is characterized for operation over the range of 2.7V to 3.6V. The DS1033 series of delay lines have three independent logic buffered delays in a single package. It is available in a standard 8-pin DIP, 150-mil 8-pin mini-SOIC. The device features precise leading and trailing edge accuracies. It has the inherent reliability of an allsilicon delay line solution. The DS1033’s nominal tolerance is ±1.5 ns and an additional tolerance over temperature and voltage of ±1.0 ns for the faster delays. Detailed specifications are shown in Table 1. Standard delay values are indicated in Table 1. C...