Differential 2 x 2 Crosspoint Switch
NB6L72M
2.5V / 3.3V Differential 2 X 2 Crosspoint Switch with CML Outputs
Multi- Level Inputs w/ Internal Termination
D...
Description
NB6L72M
2.5V / 3.3V Differential 2 X 2 Crosspoint Switch with CML Outputs
Multi- Level Inputs w/ Internal Termination
Description The NB6L72M is a clock or data high-bandwidth fully differential
2 x 2 Crosspoint Switch with internal source termination and CML output structure, optimized for low skew and minimal jitter. The differential inputs incorporate internal 50 W termination resistors and will accept LVPECL, CML, LVDS, LVCMOS, or LVTTL logic levels. The SELECT inputs are single-ended and can be driven with LVCMOS/LVTTL.
The 16 mA differential CML outputs provide matching internal 50 W terminations and 400 mV output swings when externally terminated with a 50 W resistor to VCC.
The device is offered in a small 3 mm x 3 mm 16-pin QFN package. The NB6L72M is a member of the ECLinPS MAX™ family of high performance clock and data management products.
Features
ăInput Clock Frequency > 3.0 GHz ăInput Data Rate > 3 Gb/s ă360 ps Typical Propagation Delay ă65 ps Typical Rise and Fall Times ăDifferential CML Outputs, 380 mV peak-to-peak, typical ăOperating Range: VCC = 2.375 V to 3.63 V with GND = 0 V ăInternal Input and Output Termination Resistors, 50 W ăFunctionally Compatible with Existing 2.5 V / 3.3 V LVEL, LVEP,
EP, and SG Devices
ă-40 °C to +85°C Ambient Operating Temperature ăThese are Pb-Free Devices
http://onsemi.com
1
QFN-16 MN SUFFIX CASE 485G
MARKING DIAGRAM*
16 1
NB6L 72M ALYWG
G
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= P...
Similar Datasheet