DatasheetsPDF.com

IA1208-FE10A Dataheets PDF



Part Number IA1208-FE10A
Manufacturers Rohm
Logo Rohm
Description Color image sensor heads
Datasheet IA1208-FE10A DatasheetIA1208-FE10A Datasheet (PDF)

www.DataSheet4U.com IA1208-FE10A Contact image sensor heads Color image sensor heads for High-speed Scanner IA1208-FE10A Contact Image Sensor Head with 3 times higher scanning speed due to 3ch outputs. Newly developed resolution change-over IC is employed which has improved noise resistance. zApplications High speed reading equipment (i.e. document scanners, plotters, laser multifunction devices). zFeatures 1) High speed reading capability due to 3 analog output. 2) Signal amplifier is built.

  IA1208-FE10A   IA1208-FE10A



Document
www.DataSheet4U.com IA1208-FE10A Contact image sensor heads Color image sensor heads for High-speed Scanner IA1208-FE10A Contact Image Sensor Head with 3 times higher scanning speed due to 3ch outputs. Newly developed resolution change-over IC is employed which has improved noise resistance. zApplications High speed reading equipment (i.e. document scanners, plotters, laser multifunction devices). zFeatures 1) High speed reading capability due to 3 analog output. 2) Signal amplifier is built into the image sensor IC in order to increase immunity to external noise. 3) ROHM’s newly developed sensor IC reduces failures due to ESD (based on the IEC61000-4-2 standard). 4) With the proprietary prism, the output signal is maintained uniformly. 5) The ceramic substrate is used for excellent dimensional accuracy and thermal stability. zExternal dimensions (Unit : mm) 236 ±0.5 2-φ1.5×2 Oval Hole D4MIN Scanning Line 216 (Effective Reading Width) Effective 1st bit 9.4 0.324±0.1 14 ±0.2 2-φ1.5 D4MIN 15 2.0±0.8 2- 3 +0/-0.1 MAX.3.15 1mm Pitch 15pin 6.9 6.9 max.1 max.1 max.1 max.1 No.1 Center of FCC 13.8 No.15 17.5 1/5 IA1208-FE10A Contact image sensor heads zCharacteristics Parameter Effective scanning width Primary scan dot density Total dot number Power supply voltage Reference voltage Scanning speed Clock frequency Maximum dynamic range Minimum dynamic range Dark output Operating temperature Symbol − − − VDD VREF SLT CLK VRMax VRMin. Vod − Typ. 216 1200 10368 3.3 0.8 3.0 5 0.5 0.25 VREF + − 0.1 5 to 45 Unit mm dpi dots V V ms / line MHz V V V °C zPin assignments No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Circuit AO3 GND AO2 GND AO1 MODE GND VDD VREF SP CLK V-LED B-GND G-GND R-GND I/O O I O I O I I I I I I I I I I Function Analog output Ground Analog output Ground Analog output Mode select Ground Power supply Reference voltage Start pulse Clock LED power supply BLUE LED ground GREEN LED ground RED LED ground 2/5 IA1208-FE10A Contact image sensor heads zTiming chart (a) CLK Timing Chart 1/fCLK twH twL CLK 50% 50% SP tSETUP tHOLD ts Ao 1pixel 2pixel (b-1) Data Output Timing Chart (1200dpi mode) After turning on the SP pulse, the analog output starts from the setting up point of 82 clock pulse. 1200dpi mode 1 2 82 CLK SP A O1 to 3 VREF output period Vdummy Analog output period Vdummy A O1 : A O2 : A O3 : 1 to 82clock 1 to 82clock 1 to 82clock 1 to 100pixels − − 101 to 3456pixels 3457 to 6912pixels 6913 to 10312pixels − − 10313 to 10368pixels Note)The CLK section area which is over the effective pixel numbers (Output blank part) cannot be used as the analog Output standard level. 3/5 IA1208-FE10A Contact image sensor heads (b-2) Data Output Timing Chart (600dpi mode) After turning on the SP pulse, the analog output starts from the setting up point of 82 clock pulse. 600dpi mode 1 2 82 CLK SP A O1 to 3 VREF output period Vdummy Analog output period Vdummy A O1 : A O2 : A O3 : 1 to 82clock 1 to 82clock 1 to 82c.


IA1203 IA1208-FE10A IC62LV1008L


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)