DatasheetsPDF.com

80C196MH Dataheets PDF



Part Number 80C196MH
Manufacturers Intel Corporation
Logo Intel Corporation
Description INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER
Datasheet 80C196MH Datasheet80C196MH Datasheet (PDF)

www.DataSheet4U.com ® 8XC196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER ■ High Performance CHMOS 16-bit CPU ■ 16 MHz Operating Frequency ■ 32 Kbytes of On-chip OTPROM/ROM ■ 744 Bytes of On-chip Register RAM ■ Register-to-register Architecture ■ 16 Prioritized Interrupt Sources ■ Peripheral Transaction Server (PTS) with 15 Prioritized Sources ■ Up to 52 I/O Lines ■ 3-phase Complementary Waveform Generator ■ 8-channel 8- or 10-bit A/D with Sample and Hold ■ 2-channel UART ■ Event Processor .

  80C196MH   80C196MH


Document
www.DataSheet4U.com ® 8XC196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER ■ High Performance CHMOS 16-bit CPU ■ 16 MHz Operating Frequency ■ 32 Kbytes of On-chip OTPROM/ROM ■ 744 Bytes of On-chip Register RAM ■ Register-to-register Architecture ■ 16 Prioritized Interrupt Sources ■ Peripheral Transaction Server (PTS) with 15 Prioritized Sources ■ Up to 52 I/O Lines ■ 3-phase Complementary Waveform Generator ■ 8-channel 8- or 10-bit A/D with Sample and Hold ■ 2-channel UART ■ Event Processor Array (EPA) with 2 Highspeed Capture/Compare Modules and 4 Highspeed Compare-only Modules ■ Two Programmable 16-bit Timers with Quadrature Counting Inputs ■ Two Pulse-width Modulator (PWM) Outputs with High Drive Capability ■ Flexible 8- or 16-bit External Bus ■ 1.75 µs 16 × 16 Multiply ■ 3 µs 32/16 Divide ■ Extended Temperature Available ■ Idle and Powerdown Modes ■ Watchdog Timer The 8XC196MH is a member of Intel’s family of 16-bit MCS® 96 microcontrollers. It is designed primarily to control three-phase AC induction and DC brushless motors. It features an enhanced three-phase waveform generator specifically designed for use in “inverter” motor-control applications. This peripheral provides pulsewidth modulation and three-phase sine wave generation with minimal CPU intervention. It generates three complementary non-overlapping PWM pulses with resolutions of 0.125 µs (edge triggered) or 0.250 µs (centered). The 8XC196MH has two dedicated serial port peripherals, allowing less software overhead. The watchdog timer can be programmed with one of four time options. The 8XC196MH is available as the 80C196MH, which does not have on-chip ROM, the 87C196MH, which contains 32 Kbytes of on-chip OTPROM* or factory programmed ROM, and the 83C196MH, which contains 32 Kbytes of factory programmed MASK ROM. It is available in 84-lead PLCC, 80-lead Shrink EIAJ/QFP, and 64-lead SDIP. The 64-lead package does not contain pins for the P5.1/INST and P6.7/PWM1 signals. Operational characteristics are guaranteed over the temperature range of – 40°C to + 85°C. *One-Time Programmable Read-Only Memory (OTPROM) is similar to EPROM but comes in an unwindowed package and cannot be erased. It is user programmable. Intel Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in an Intel product. No other circuit patent licenses are implied. Information contained herein supersedes previously published specifications on these devices from Intel. © INTEL CORPORATION, 2004 August 2004 Order Number: 272543-003 8XC196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER ® CPU 16 32K On-chip ROM/ OTPROM Interrupt Controller 8 Memory Controller 8 Queue Port 5 Control Signals Port 3 AD7:0 Port 4 AD15:8 Watchdog Timer 744 Byte Register File 8/10-Bit A/D Converter RALU 24 Bytes CPU SFRs Microcode Engine Peripheral Transaction Server 8 S/H Mux Port 0 Baud Rate Generator 4 SIO 0 SIO 1 Timer 1 Timer 2 Event Processor Array 3-Phase Waveform Generator 6 PWM0 PWM1 2 Port 1 Port 2 6 Port 6 2 8 4 A/D Port 0 Port 1 Serial I/O 8 Port 2 SIO, EPA 2 Capture/Compare 4 Compare EXTINT 8 Port 6 Waveform Generator A2542-01 Figure 1. 8XC196MH Block Diagram 2 ® 8XC196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER the application. The Intel Packaging Handbook (order number 240800) describes Intel’s thermal impedance test methodology. Table 1. Thermal Characteristics Package Type 84-lead PLCC 80-lead QFP 64-lead SDIP 33°C/W 56°C/W 56°C/W θJA 11°C/W 12°C/W N/A θJC PROCESS INFORMATION This device is manufactured on PX29.5, a CHMOS IV process. Additional process and reliability information is available in Intel’s Components Quality and Reliability Handbook (order number 210997). All thermal impedance data is approximate for static air conditions at 1 watt of power dissipation. Values will change depending on operating conditions and X XX 8 X C 196 XX XX Device Speed: Product Family: CHMOS Technology Program Memory Options: Package - Type Options: Temperature and Burn In Options: 0 = ROMless, 3 = ROM, 7 = OTPROM x = SDIP, x = PLCC, x = QFP x = –40˚C – +85˚C Ambient with Intel Standard Burn-In A2759-01 No Mark = 16 MHz Kx, Mx, Nx Figure 2. The 8XC196MH Family Nomenclature NOTE: To address the fact that many of the package prefix variables have changed, all package prefix variables in this document are now indicated with an "x". 3 8XC196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER ® Table 2. 8XC196MH Memory Map Address (1) 0FFFFH 0A000H 09FFFH 02080H 0207FH 0205EH 0205DH 02040H 0203FH 02030H 0202FH 02020H 0201FH 0201CH 0201BH 0201AH 02019H 02018H 02017H 02014H 02013H 02000H 01FFFH 01F00H 1EFFH 300H 2FFH 18H 17H 00H External Memory Internal ROM/OTPROM or External Memory Reserved PTS Vectors Interrupt Vectors (upper) ROM/OTPROM Security Key Reserved Reserved (must contain 20H) CCB1 Reserved (must contain 20H) CCB0 Reserved Interrupt Vectors (lower) Internal SFRs External Memory Register RAM CPU SFRs 3 .


83C196KB 80C196MH 83C196MH


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)