www.DataSheet4U.com
Product Brief
PE42612 Flip Chip
SP4T UltraCMOS™ 2.6 V Switch 100 – 3000 MHz
Figure 1. Functional D...
www.DataSheet4U.com
Product Brief
PE42612 Flip Chip
SP4T UltraCMOS™ 2.6 V Switch 100 – 3000 MHz
Figure 1. Functional Diagram
Features
Two pin CMOS logic control inputs Supports 1.8 V Control Logic Low TX insertion loss: 0.55 dB at
TX1
RX1
TX2
RX2
CMOS Control/Driver and ESD
V1
V2
900 MHz, 0.70 dB at 1900 MHz Isolation of 39 dB at 900 MHz, 31 dB at 1900 MHz Low harmonics 2fo = -82 dBc and 3fo = -74 dBc at 35 dBm input power 1500 V HBM ESD tolerance Built in CMOS decoder/driver RX SAW over voltage protection circuit No blocking capacitors required
Figure 2. Die Top View
Product Description
The PE42612 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets. On-chip CMOS decode logic is used to facilitate two-pin, low voltage CMOS control inputs. High ESD tolerance of 1500 V at all ports, no blocking capacitor requirements and on-chip SAW filter over-voltage protection devices make this the ultimate in integration and ease of use. The PE42612 is manufactured on Peregrine’s UltraCMOS™ process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS.
10 TX1
11 N/C
12 ANT
1 RX1
9 GND
2 GND
8 TX2 GND 7 VDD 6 V2 5
3 RX2 V1 4
Document No. 70-0217-01 │ www.psemi.com Contact
[email protected] for full version of datasheet
©2006 Peregrine Semiconductor Co...