Single Pole Double Throw SPDT Switch
SA58643
Single-Pole Double-Throw (SPDT) switch
Rev. 01 — 20 November 2006
Product data sheet
1. General description
Th...
Description
SA58643
Single-Pole Double-Throw (SPDT) switch
Rev. 01 — 20 November 2006
Product data sheet
1. General description
The SA58643 is a wideband RF switch fabricated in BiCMOS technology and incorporating on-chip CMOS/TTL compatible drivers. Its primary function is to switch signals in the frequency range DC to 1 GHz from one 50 Ω channel to another. The switch is activated by a CMOS/TTL compatible signal applied to the enable channel 1 pin (ENCH1).
The extremely low current consumption makes the SA58643 ideal for portable applications. The excellent isolation and low loss makes this a suitable replacement for PIN diodes.
The SA58643 is available in an 8-pin TSSOP package.
2. Features
I Wideband (DC to 1 GHz) I Low through loss (1 dB typical at 200 MHz) I Unused input is terminated internally in 50 Ω I Excellent overload capability (1 dB gain compression point +18 dBm at 300 MHz) I Low DC power (170 µA from 5 V supply) I Fast switching (20 ns typical) I Good isolation (off channel isolation 60 dB at 100 MHz) I Low distortion (IP3 intercept +33 dBm) I Good 50 Ω match (return loss 18 dB at 400 MHz) I Full ESD protection I Bidirectional operation
3. Applications
I Digital transceiver front-end switch I Antenna switch I Filter selection I Video switch I FSK transmitter
NXP Semiconductors
SA58643
Single-Pole Double-Throw (SPDT) switch
4. Ordering information
Table 1. Ordering information
Type number Package
Name
Description
SA58643DP
TSSOP8 plastic thin shrink small outlin...
Similar Datasheet