www.DataSheet4U.com
Product Specification
PE4263 DIE
SP6T UltraCMOS™ 2.6 V Switch 100 – 3000 MHz
Figure 1. Functional...
www.DataSheet4U.com
Product Specification
PE4263 DIE
SP6T UltraCMOS™ 2.6 V Switch 100 – 3000 MHz
Figure 1. Functional Diagram
Features
Three pin CMOS logic control with
TX1
RX1
TX2
RX2
RX3
CMOS Control/Driver and ESD
RX4
integral decoder/driver Low TX insertion loss: 0.55 dB at 900 MHz, 0.65 dB at 1900 MHz TX – RX Isolation of 48 dB at 900 MHz, 40 dB at 1900 MHz Low harmonics: 2fo = -85 dBc and 3fo = -72 dBc 1500 V HBM ESD tolerance all ports 41 dBm P1dB No blocking capacitors required
Product Description
V1 V2 V3
Figure 2. Die Top View
RX1 GND RX2 GND GND GND RX3 GND TX2 GND RX4 GND
TX1
ANT
The PE4263 SP6T RF UltraCMOS™ Switch addresses the specific design needs of the Quad-Band GSM Handset Antenna Switch Module Market. On-chip CMOS decode logic facilitates three-pin low voltage CMOS control. High ESD tolerance of 1500 V at all ports, no blocking capacitor requirements and on-chip SAW filter over-voltage protection devices make this the ultimate in integration and ruggedness. The PE4263 UltraCMOS™ RF Switch is manufactured in Peregrine’s patented Ultra Thin Silicon (UTSi®) CMOS process, offering the performance of GaAs with the economy and integration of conventional CMOS.
GND
VDD
V3
GND
V2 V1
GND
Document No. 70-0175-02 │ www.psemi.com NDA required for full version: Contact
[email protected]
©2005 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 4
PE4263
Product Specification
Table 1. Electrical Specifications @ +25 °C, VD...