SPDT UltraCMOS RF Switch DC
www.DataSheet4U.com
Product Specification
PE4235
Product Description
The PE4235 RF Switch is designed to cover a broad...
Description
www.DataSheet4U.com
Product Specification
PE4235
Product Description
The PE4235 RF Switch is designed to cover a broad range of applications from near DC to 4000 MHz. This single-supply reflective switch integrates on-board CMOS control logic driven by a simple, single-pin CMOS or TTL control input. Using a nominal +3-volt power supply, a 1 dB compression point of +15 dBm can be achieved. The PE4235 also exhibits outstanding isolation of better than 40 dB at 1000 MHz and is offered in a small 3x3 mm DFN package. The PE4235 is manufactured on Peregrine’s UltraCMOS™ process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. Figure 1. Functional Diagram
RFC
SPDT UltraCMOS™ RF Switch DC - 4000 MHz Features Single 3.0-volt power supply
Low insertion loss: 0.40 dB at
1000 MHz, 0.45 dB at 2000 MHz
High isolation of 40 dB at 1000 MHz,
30 dB at 2000 MHz
Typical 1 dB compression point of
+15 dBm
Single-pin CMOS or TTL logic control Available in a 6-lead DFN package
Figure 2. Package Type
6-lead DFN
RF1
RF2
CMOS Control Driver
CTRL
Table 1. Electrical Specifications @ +25 °C, VDD = 3 V (ZS = ZL = 50 Ω)
Parameter
Operating Frequency1 Insertion Loss Isolation – RFC to RF1/RF2 Isolation – RF1 to RF2 Return Loss ‘ON’ Switching Time ‘OFF’ Switching Time Video Feedthrough2 Input 1 dB Compression Input IP3 2000 MHz 2000 MHz, 5 dBm 13.5 32.5 1000 M...
Similar Datasheet