SBOS374 − NOVEMBER 2006
ELECTRICAL CHARACTERISTICS: GENERAL
Boldface limits apply over the specified temperature range: TA = −40°C to +125°C.
At TA = +25°C, VS = +12V, VCM = +12V, VSENSE = 100mV, RL = 10kΩ to GND, RPULL-UP = 5.1kΩ connected from CMPOUT to VS, and CMPIN = 1V,
unless otherwise noted.
INA200, INA201, INA202
Operating Power Supply
Comparator Power-On Reset Threshold(1)
VOUT = 2V
VSENSE = 0mV
Specified Temperature Range
Operating Temperature Range
Storage Temperature Range
(1) The INA200, INA201, and INA202 are designed to power-up with the comparator in a defined reset state as long as RESET is open or grounded. The comparator
is in reset as long as the power supply is below the voltage shown here. The comparator assumes a state based on the comparator input above this supply voltage.
If RESET is high at power-up, the comparator output comes up high and requires a reset to assume a low state, if appropriate.